GB/T 45515-2025Quality grading of consumer products — Lighting products (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting is required.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by China Light Industry Federation.

This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC 224).

This document was drafted by: National Electric Light Source Quality Supervision and Inspection Center (Beijing), Beijing Electric Light Source Research Institute Co., Ltd., Xiamen Lidaxin Digital Education Technology Co., Ltd., Xiamen Tongshida Lighting Co., Ltd., OPPLE Lighting Co., Ltd., Huizhou NVC Optoelectronics Technology Co., Ltd.

Foshan Electrical Lighting Co., Ltd., Hangzhou Huapu Yongming Optoelectronics Co., Ltd., Shanghai Times Lighting Electrical Appliance Testing Co., Ltd.

China Quality Certification Center Co., Ltd., China Lighting Industry Association, China Institute of Standardization Institute, Huizhou Xidun Industrial Development Co., Ltd., Bridgelux (Xiamen) Co., Ltd., Shenzhen Feiyetai Electronics Co., Ltd., Guangzhou Berman Optoelectronics Technology Co., Ltd., Guangdong Nanyue Quality and Technology Research Institute, Yueying Lighting Technology (Guangdong) Co., Ltd., Zhejiang Hanlan Optoelectronics Limited company.

The main drafters of this document are: Wang Chong, Zheng Xuesheng, Chen Yuchang, Chi Wei, Li Yanjie, Zhao Jun, Wang Chunlin, Miao Fei, Han Yanhua, Ni Wei, Yang Yue, Zhuang Shijing, Deng Maolin, Liu Xia, Chen Xiaoliang, Huang Daoheng, Tang Borong, He Xiaolin, Huang Yanmei, Zeng Junhua, Wu Yongqiang, Peng Zhenjian, Wu Xiaosen, Zhou Chaoyang, Guan Weibin.

Consumer Quality Grading Lighting Products

1 Scope

This document specifies the basic requirements, marking, quality grading requirements and conformity verification methods, quality grade standards, and quality classification standards for lighting products.

Identification and judgment rules.

This document applies to the quality classification of the following lighting products.

a) Light source

1) Non-directional integrated LED lamps for general lighting (also known as "non-directional self-ballasted LED lamps for general lighting");

2) Directional integrated LED lamps for general lighting (also known as "reflective self-ballasted LED lamps");

3) Integrated LED lamps for decorative lighting;

4) Double-ended LED lamp (to replace straight tube fluorescent lamp);

5) LED modules for general indoor lighting;

6) Low-pressure mercury vapor discharge ultraviolet germicidal lamp;

7) High pressure sodium lamps for general lighting (external start).

b) Lighting

1) LED downlight;

2) LED flat panel lights;

3) LED ceiling light;

4) Non-decorative LED light strips;

5) Desk lamp for reading and writing;

6) LED floor lamp for reading and writing;

7) LED lamps for road and street lighting;

8) LED lamps for tunnel lighting.

Other lighting products not included in the classification shall be implemented accordingly.

2 Normative references

GB/T 2423.17

GB/T 2900.65

GB/T 7000.1

GB/T 9473-2022

GB/T 13259

GB 17625.1

GB/T 17626.5

GB/T 17743

GB/T 18595