GB/T 3167-2015Metal-cutting machine tools—Graphical symbols for operation indications (English PDF)
金属切削机床 操作指示图形符号
This is a limited preview
Buy now to download the full PDF (70 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3167-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
September 1, 2015
Scope
GB/T 3167-2015 is the English-translated version of 金属切削机床 操作指示图形符号.
GB/T 3167-2015 is the Chinese standard "Metal-cutting machine tools—Graphical symbols for operation indications". Its scope clause reads: This standard specifies graphical symbols for a variety of metal-cutting machine operating instructions.
This standard applies to metal cutting machine tools and their accessories operating panel, operating instructions signs and logos (logo), etc., but also other similar machinery Reference may be used. Its clauses include operating instructions and other graphical symbols.
Found what you need?
Document preview — GB/T 3167-2015
National Standard of the People's Republic of China
- ICS
- 25.080.01
- Classification
- J 50
- Replacing
- GB/T 3167-1993
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Operating instructions and other graphical symbols
- 3.1 operation, measurement, motion, motion graphics primitives symbol
- 3.2 Operation of the workpiece, the discharge of waste and graphic symbol means
- 3.5 metal cutting tools and a common graphical symbols
- 3.6 Graphics turning lathe and symbols
- 3.7 drilling, boring, reaming and boring machine graphic symbols
- 3.11 planing, slotting and machining planer, slotting graphic symbols
- 3.12 broaching broaching processing and graphic symbols
- 3.13 sawing sawing graphics processing and symbols
- 3.15 Safety and warning graphical symbol
- 3.16 Other graphical symbols
- 4 requirements
- Appendix A (informative) Example 66 graphical symbols used in combination
- Annex B (informative) This standard and GB/T 3167-1993 major changes Addendum
- References
1 Scope
This standard specifies graphical symbols for a variety of metal-cutting machine operating instructions.
This standard applies to metal cutting machine tools and their accessories operating panel, operating instructions signs and logos (logo), etc., but also other similar machinery
Reference may be used.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 7000 Graphical symbols for equipment - Index and synopsis (Graphicalsymbolsforuseonequipment-Indexand synopsis)
3 Operating instructions and other graphical symbols
3.1 operation, measurement, action, sports basic graphical symbols
Operation, measurement, movements to the basic graphical symbols shown in Table 1.
Table 1 operation, measurement, action, sports basic graphical symbols
No Graphic Symbol Name Description
3.1.1 Start
IEC 60417 5007
Preferably white (available in green)
3.1.2 Stop
IEC 60417 5008
Black (or other colors,
No red)
3.1.3 Jog
IEC 60417 5011
Hold down the move, loosen stop […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 70 pages — is available in the English PDF.
Referenced standards
Cited by
- GB 15760-2025Metal cutting machines - General specifications for safeguarding
- GB/T 34880.3-2025Test conditions for 5-axis simultaneous machining centers - Part 3: Specifications
- GB/T 9061-2025Metal-cutting machine tools - General specifications
- GB/T 43411-2023Electron beam selective melting additive manufacturing machines—General technical requirements
- GB/T 38331-2019General technical requirements for Li-ion battery made machine
- JB/T 8801-2017Machining centres - Specifications
Similar standards
Editions of GB/T 3167
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3167-2015 | Metal-cutting machine tools—Graphical symbols for operation indications | current edition | Current |
| GB/T 3167-1993 | Metal-cutting machine tools—Graphical symbols for operation indications | previous edition | Superseded |
This page sells the current edition, GB/T 3167-2015. Earlier editions are listed for reference only.
How to Download GB/T 3167-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3167-2015
$1,170.00