GB/T 43411-2023Electron beam selective melting additive manufacturing machines—General technical requirements (English PDF)
电子束选区熔化增材制造机床 通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43411-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
November 27, 2023
Implementation date
June 1, 2024
Scope
GB/T 43411-2023 is the English-translated version of 电子束选区熔化增材制造机床 通用技术条件.
GB/T 43411-2023 is the Chinese standard "Electron beam selective melting additive manufacturing machines—General technical requirements".
Its scope clause reads: This document specifies the composition and design, processing and assembly, safety protection, geometric accuracy inspection, General technical requirements such as positioning accuracy inspection, forming accuracy inspection, marking, packaging, transportation and storage: This document is applicable to the design and manufacturing of electron beam selective melting additive manufacturing machine tools:. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 43411-2023
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Classification
- J 59
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Machine tool composition and design requirements
- 5 Processing and assembly requirements
- 6 Safety protection requirements
- 7 Geometric accuracy inspection
- 8 Positioning accuracy inspection
- 9 Forming accuracy inspection
- 10 Marking, packaging, transportation and storage
1 Scope
This document specifies the composition and design, processing and assembly, safety protection, geometric accuracy inspection,
General technical requirements such as positioning accuracy inspection, forming accuracy inspection, marking, packaging, transportation and storage:
This document is applicable to the design and manufacturing of electron beam selective melting additive manufacturing machine tools:
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:
GB/T 191 Packaging, storage and transportation pictorial mark
GB 2894 Safety signs and guidelines for their use
GB/T 3167 Graphical symbols for metal cutting machine tool operating instructions
GB/T 5226:1 Mechanical and electrical safety mechanical and electrical equipment Part 1: General technical conditions
GB 5959:7 Safety of electric heating devices Part 7: Special requirements for devices with electron guns
GB/T 13306 Signage
GB/T 13384 General technical conditions for mechanical and electrical product packaging
GB/T 14896:7 Special processing machine tool terminology Part 7: Additive manufacturing machine tools
GB/T 17421:5 General Principles for Machine Tool Inspection Part 5: Determination of Noise Emissions
GB/T 18569:1 Machinery safety to reduce health risks from harmful substances emitted by machinery Part 1: Used in machinery manufacturing
Business Principles and Norms
GB/T 18569:2 Machinery safety reducing health risks from hazardous substances emitted by machinery Part 2: Generation verification process
Methods
GB/T 25373 General technical conditions for metal cutting machine tool assembly
GB 26503-2011 Technical requirements for safety protection of rapid prototyping machine tools
GB/T 26805 (all parts) Industrial control computer system software
GB/T 32218 Vacuum technology vacuum system leak rate test method
GB/T 35351 Additive Manufacturing Terminology
GB/T 37391 Specification for complete sets of control equipment for programmable controllers
GB/T 39329 Additive Manufacturing Test Method Standard Test Piece Accuracy Inspection
HJ979 Radiation safety and protection of electron accelerator irradiation equipment
3 Terms and definitions
The following terms and definitions as defined in GB/T 14896:7 and GB/T 35351 apply to this document:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 2894Safety colours and safety signs
- GB/T 3167Metal-cutting machine tools—Graphical symbols for operation indications
- GB/T 5226.1Electrical safety of machinery -- Electrical equipment of machines -- Part 1: General requirements
- GB 5959.7Safety in electro-heat installations -- Part 7: Particular requirements for installations with electron guns
- GB/T 13306Plates
GB/T 26805
Similar standards
How to Download GB/T 43411-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 26503-2011 — Rapid prototyping machines -- Technical requirements for safeguarding
GB 2894-2025 — Safety colours and safety signs
GB 5959.7-2008 — Safety in electro-heat installations -- Part 7: Particular requirements for installations with electron guns
Secure payment via Stripe
Payments accepted
GB/T 43411-2023
$300.00