Valid

JB/T 10167-2000Gear shaping machines - Technical specifications for safety protection (English PDF)

插齿机 安全防护技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10167-2000 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

January 4, 2000

Implementation date

June 1, 2000

Scope

JB/T 10167-2000 is the English-translated version of 插齿机 安全防护技术条件.

JB/T 10167-2000 is a Chinese machinery industry standard holding the safeguarding specification for gear shaping machines. It carries the Chinese classification J56.

Among the standards it quotes are GB/T 3167-1993, GB/T 3168-1993, GB 4053.1-1993, GB 4053.2-1993, GB 4053.3-1993, GB 4053.4-1983, GB/T 5226.1-1996, GB/T 6576-1986, GB 12265.1-1997, GB 12265.3-1997, GB/T 15706.2-1995, GB 15760-1995, GB/T 16769-1997, GB/T 17161-1997, JB/T 9875-1999 and JB/T 10051-1999.

Found what you need?

Document preview — JB/T 10167-2000

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 10167-2000 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 January 2000 and has been in force since 1 June 2000.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 16 pages in English translation.

2 Scope Preview

This standard is a Chinese machinery industry standard holding the safeguarding specification for gear shaping machines. It carries the Chinese classification J56. Among the standards it quotes are GB/T 3167-1993, GB/T 3168-1993, GB 4053.1-1993, GB 4053.2-1993, GB 4053.3-1993, GB 4053.4-1983, GB/T 5226.1-1996, GB/T 6576-1986, GB 12265.1-1997, GB 12265.3-1997, GB/T 15706.2-1995, GB 15760-1995, GB/T 16769-1997, GB/T 17161-1997, JB/T 9875-1999 and JB/T 10051-1999.

JB/T 10167-2000 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,316 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 Normative references

GB/T 3167-1993, GB/T 3168-1993, GB 4053.1-1993, GB 4053.2-1993, GB 4053.3-1993, GB 4053.4-1983, GB/T 5226.1-1996, GB/T 6576-1986, GB 12265.1-1997, GB 12265.3-1997, GB/T 15706.2-1995, GB 15760-1995, GB/T 16769-1997, GB/T 17161-1997, JB/T 8356.1-1996, JB/T 9875-1999, JB/T 10051-1999

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 16 pages

5 Classification and status

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download JB/T 10167-2000

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10167-2000

$389.00