GB/T 31301.8-2020Footwear manufacturing machines—Safety requirememts—Part 8: Moulding machines (English PDF)

1 Scope

This part of GB/T 31301 specifies the relevant safety requirements for the design, installation, transportation, adjustment and operation of the setting machine. This section contains

The operator's expected use of the setting machine and the foreseeable misuse arising from all major hazards and dangers related to the setting machine within the scope of this part

Dangerous states and dangerous events (see Appendix A).

This part is applicable to the shaping machine (machinery) that uses the hot and cold and pressure mixing methods to shape the upper and shoes during the shaping process.

For a schematic diagram, see Appendix B).

This section does not apply to sole pressure forming machines.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article

Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.

GB/T 3766 General rules and safety requirements of hydraulic transmission system and its components

GB/T 5226.1-2019 Mechanical Electrical Safety Mechanical Electrical Equipment Part 1. General Technical Conditions

GB/T 7932 Pneumatic general rules and safety requirements for the system and its components

GB/T 8196-2018 General requirements for the design and manufacture of fixed and movable guards for mechanical safety guards

GB/T 12265.3 Minimum distance for mechanical safety to avoid squeezing of various parts of the human body

GB/T 14048.5-2017 Low-voltage switchgear and control equipment Part 5-1. Control circuit appliances and switching elements electromechanical

Control circuit appliances

GB/T 15706-2012 General rules of machinery safety design risk assessment and risk reduction

GB/T 16754 Mechanical Safety Emergency Stop Design Principles

GB/T 16855.1-2018 Safety related parts of machinery safety control system Part 1. General rules for design

GB/T 17421.5-2015 General rules for machine tool inspection Part 5. Determination of noise emission

GB/T 17454.1 Mechanical Safety Pressure Sensitive Protection Device Part 1. General Rules for Design and Test of Pressure Sensitive Mats and Pressure Sensitive Floors

GB/T 18153-2000 Ergonomic data for determining the limit of hot surface temperature by mechanically safe contactable surface temperature

GB/T 18209.1 Electrical and mechanical safety instructions, signs and operations Part 1. Requirements for visual, auditory and tactile signals

GB/T 18569.1-2001 Safety of machinery reduces the health risks of hazardous substances emitted by machinery. Part 1. Used for

Principles and specifications of machinery manufacturers

GB/T 18717.1 Ergonomic design for machine safety Part 1. Principles for determining the size of the opening of the whole body into the machine

GB/T 18717.2 Ergonomic design for machine safety Part 2. Determination of the size of the opening of the human body part into the machine in principle

GB/T 18831-2017 Design and selection principles of interlocking devices related to machinery safety and protective devices

GB/T 19436.1-2013 Mechanical and electrical safety electrosensitive protection equipment Part 1. General requirements and tests

GB/T 19436.2-2013 Mechanical electrical safety electrosensitive protection equipment Part 2. Use of active photoelectric protection device […]