GB/T 3047.1-1995Series of basic dimensions of panels，rack and cabinets for vertical increment of 20mm (English PDF)

3 Terms

4 Subrack front panels (see Figures 2, 3 and 4)

5 Plug-in unit front panels (see Figure 6)

6 Racks (see Figure 7)

7 Cabinets (see Figure 8)

8 Mounting dimensions of the subrack front panels in the rack or cabinet

Foreword

This document was issued on 16 January 1995 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 August 1995.

It replaces GB 3047.1-1982.

The document is under the responsibility of the Standardization Administration of China.

Classification: ICS 31.240, CCS K 05.

About this edition

GB/T 3047.1-1995 is the current edition. It was issued on 16 January 1995 and has been in force since 1 August 1995, replacing GB 3047.1-1982.

GB 3047.1-1982 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.

Edition history and citation

GB/T 3047.1-1995 replaces GB 3047.1-1982. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

GB/T 3047.1-1995 is classified under ICS 31.240, in the field of electronics. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

Its Chinese Standard Classification code is CCS K 05. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.

The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.

The document is under the responsibility of the Standardization Administration of China, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is GB/T 3047.1-1995. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 31.240 and CCS K 05 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.