CJ/T 302-2008Tank type non-negative pressure water supply devices (English PDF)

Foreword

This standard proposed by the Ministry of Housing and Urban Standard and Design Institute.

This standard by the Ministry of Housing and Urban Water Supply and Drainage Products Standardization Technical Committee.

This standard was drafted. Beijing Wei Paige Technology Development Co., Ltd., Beijing Walter Mike Technology Development Co., Ltd..

1 Scope

This standard specifies the classification, requirements, test methods, inspection rules, signs, packaging, Transport, storage.

This standard applies to civil and industrial buildings in the living or production of water supply system box negative pressure water equipment.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. All dated references, which are subsequently owned Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to reach an agreement based on this standard research Whether you can use the latest versions of these files. For undated references, the latest version applies to this standard.

GB 150 steel pressure vessel GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.:1997, MOD) GB 755 rotary motor fixed and performance (GB 755-2000, idt IEC 60034-1.:1996) GB/T 3047.1 height 20mm panel, frame and cabinet basic size series GB/T 3214 pump flow measurement method Electrical control equipment GB/T 3797-2005 GB 4208 enclosure protection class (GB 4208-2008, IEC 60529.:2001, IDT) GB/T 5657 centrifugal pump technical conditions (Class III) (GB/T 5657-1995, eqv ISO 9908.:1993) GB/T 12771 stainless steel welded steel pipe for fluid transport GB/T 13306 signs GB/T 13384 mechanical and electrical product packaging General technical conditions GB/T 17219 drinking water distribution equipment and protective materials safety evaluation criteria GB 50236 field equipment, industrial pipe welding construction and acceptance specifications Code for construction and acceptance of water supply and sewer pipelines GB 50268-1997 CJ/T 160 backflow preventer JB/T 3085 Power Transmission Control Device Packaging and Shipping Specifications JB/T 4711 Pressure Vessel Coating and Transport Packaging

3 Terms and definitions

The following terms and definitions apply to this standard.

Box negative pressure water equipment can be directly connected with the water supply network to ensure that the water supply network does not produce negative pressure at the peak of the closed water tank pressurized to compensate for the water supply network the lack of water supply to meet the needs of users of water equipment. Mainly by the sealed water tank, the main pump unit, frequency control cabinet, booster device, water diversion equipment Set, steady flow tank, no negative pressure flow controller, pressure devices and pressure sensors and other components.

Pressurized device

According to the rated flow of equipment, the water in the closed tank can be pressurized to the same pressure as the water supply network.