GB/T 30366-2024Biomass vocabulary (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document replaces GB/T 30366-2013 "Biomass Terminology". Compared with GB/T 30366-2013, except for structural adjustment and editorial In addition to the modifications, the main technical changes are as follows.

— Changed the scope (see Chapter 1, Chapter 1 of the 2013 edition);

— Deleted four terms such as "softening temperature of ash melting" and "initial deformation temperature of ash melting" (see the 2013 edition 2.1.18~2.1.20 and 2.1.26);

— Added 9 terms such as "cork" and "cork" (see 3.2.14 to 3.2.22);

— Added "biomass raw material analysis and physical and chemical properties testing" (see 3.3);

— Added 8 terms such as "wet basis moisture content" and "dry basis moisture content" (see 3.3.5, 3.3.6, 3.3.16~3.3.21);

— Added the term "air source heat pump drying" (see 3.4.19);

— Added 28 terms such as "biomass materials" and "wood-plastic composite materials" (see 3.5.2 to 3.5.29).

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the State Forestry and Grassland Administration.

This document is under the jurisdiction of the National Forestry Biomass Materials Standardization Technical Committee (SAC/TC416).

This document was drafted by: Wood Industry Research Institute of Chinese Academy of Forestry, Zhejiang Agricultural and Forestry University, Dehua Rabbit Baby Decoration New Materials Co., Ltd.

Co., Ltd., Xiamen S&P Standardization Services Co., Ltd., Shangnan County Animal Husbandry and Veterinary Center, Linyi Customs Comprehensive Technical Service Center, Langfang Minfeng Wood Industry Co., Ltd., Bili Chuangzhi (Hangzhou) Standard Technology Service Co., Ltd., Shandong Shunchuang New Materials Technology Co., Ltd., Zhejiang Menshifujia HUD LIMITED.

The main drafters of this document are: Duan Xinfang, Zhang Ran, Wang Zhengguo, Li Luming, Liu Meizhen, Li Jie, Duan Xinming, Xun Weiwei, Shen Yiqiang, Su Dameng, Miao Zou, Haiming Bi, Huaigang Tu, Xiaofeng Wu, Xiaomeng Guo.

The previous versions of this document and the documents it replaces are as follows.

— First published in 2013 as GB/T 30366-2013;

— This is the first revision. Biomass Terminology

1 Scope

This document defines the terms for biomass in general, sources, raw material analysis and physicochemical property testing, conversion and processing, and utilization.

This document applies to technical activities such as production, circulation, and testing of biomass and its related products.

2 Normative references

This document has no normative references.

3 Terms and definitions