Valid

GB/T 29482.1-2013Numerical control system of industrial machines - Part 1: General requipments (English PDF)

工业机械数字控制系统第1部分：通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (56 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29482.1-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 11, 2012

Implementation date

July 1, 2013

Scope

GB/T 29482.1-2013 is the English-translated version of 工业机械数字控制系统第1部分：通用技术条件.

GB/T 29482.1-2013 is the Chinese standard "Numerical control system of industrial machines - Part 1: General requipments". Its scope clause reads: GB/T 29482 This part of the technical requirements for industrial machinery manufacturing and digital control systems and acceptance testing (test) method.

This section applies to rated voltage not exceeding AC1000V, DC1500V, does not exceed the rated frequency of 200Hz digital industrial machinery Control system (hereinafter referred to as CNC systems or products), such as. metal-cutting machine tools, casting and forging machinery, woodworking machinery, machine tools, plastic machine Machinery, textile machinery, sewing machinery.

Other mechanical digital control system can refer to this section. Note.

This section is basic, common requirements for industrial machinery digital control systems, as well as various types of specific products (including numerical control apparatus, drive unit, electric servo Motivation, etc.) according to their performance, structure and other characteristics of the relevant part of the contents of this supplement, modify and/or replacement and specific.

Found what you need?

Document preview — GB/T 29482.1-2013

National Standard of the People's Republic of China

ICS: 21.010
Classification: J 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Operating Conditions
4.1 climate conditions
4.1.2 high and low temperature operation
4.1.3 temperature operation
4.1.4 Damp heat-resistant
4.2 Mechanical environmental conditions
4.2.1 Vibration
4.2.2 Impact
4.2.3 Free fall
4.3 Power requirements
4.3.1 operating voltage range
4.3.2 voltage harmonics
4.4 Special operating conditions
5 Design & Manufacture
5.1 identification (mark)
5.1.1 Product and security IDs (flag)
5.1.2 identifies the operator panel and interface
5.1.3 Component identification
5.1.4 packaging and labeling
5.2 color requirements
5.2.1 color mark
5.2.2 color control elements
5.2.3 instruction color element
5.4 position control element
5.5 Functional ground
5.6 wire connection
5.7 Enclosure protection
5.8 Component Quality
5.9 Convenience
6 Product Features
6.1 Coordinate System and 19 axis motion
6.2 instruction code and data format
6.4 Function
6.5 Interface and Communication
7 product safety and electromagnetic compatibility (EMC)
7.1 Basic Security
7.2 Safety Responsibility
7.3 Protection against electric shock
7.4 Protective bonding (protective earth)
7.5 Insulation resistance
7.6 withstanding voltage test
7.7 Fire protection and non-metallic materials, flame retardant
7.8 Noise
7.9 Electromagnetic compatibility (EMC) --- 26 launch
7.10 Electromagnetic compatibility (EMC) --- Immunity
7.10.1 Electrostatic discharge immunity
7.10.2 electrical fast transient burst immunity
7.10.3 Surge (impact) immunity
7.10.4 voltage dips and short interruptions immunity
7.10.5 RFEMS
7.10.6 conducted disturbances, induced RF field immunity
7.10.7 Power frequency magnetic field immunity
7.10.8 immunity performance criteria
8 Reliability
9 document accompanying the product
10 packaging, storage and transportation
11 manufacturer's guarantee
12 test conditions and inspection rules
12.1 Test conditions
12.1.1 Test normal atmospheric conditions
12.1.2 Arbitration test atmospheric conditions
12.1.3 reference atmospheric conditions
12.1.4 test and measurement equipment and instruments
12.2 Inspection Rules
12.2.1 Inspection classification
12.2.2 stereotypes test
12.2.3 factory inspection
12.2.4 Type test
Appendix A (informative) Reliability Test and Evaluation Method
References

1 Scope

GB/T 29482 This part of the technical requirements for industrial machinery manufacturing and digital control systems and acceptance testing (test) method.

This section applies to rated voltage not exceeding AC1000V, DC1500V, does not exceed the rated frequency of 200Hz digital industrial machinery

Control system (hereinafter referred to as CNC systems or products), such as. metal-cutting machine tools, casting and forging machinery, woodworking machinery, machine tools, plastic machine

Machinery, textile machinery, sewing machinery. Other mechanical digital control system can refer to this section.

Note. This section is basic, common requirements for industrial machinery digital control systems, as well as various types of specific products (including numerical control apparatus, drive unit, electric servo

Motivation, etc.) according to their performance, structure and other characteristics of the relevant part of the contents of this supplement, modify and/or replacement and specific.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191-2008 Packaging - Pictorial signs (ISO 780.1997, MOD)

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-

1.2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-

2.2007, IDT)

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Db. Damp heat (12h

12h cycle) (IEC 60068-2-30.2005, IDT)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (idt

IEC 60068-2-27. 1987)

GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt

IEC 60068-2-32.1990)

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)

GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (IEC 60068-2-14. 1984, IDT)

GB/T 3167 metal-cutting machine tools - Symbols

GB/T 4205-2010 basic safety rules and operating rules of the man-machine interface, marking and identification (IEC 60447.2004, IDT)

GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT)

GB/T 5169.11-2006 Fire hazard testing for electric and electronic products - Part 11. Glowing/hot-wire based test methods to

Glow-wire flammability test method for products (IEC 60695-2-11.2000, IDT)

GB/T 5169.16-2008 Fire hazard testing for electric and electronic products - Part 16. Test flames - 50W horizontal and vertical fire

Flame test methods (IEC 60695-11-10.2003, IDT)

GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements (IEC 60204-1.2005, […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 56 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 37414.2-2020|GB/T 37414.3-2020|GB/T 37414.1-2019|GB/T 29771.1-2013|GB/T 13306-2011|GB/T 17889.7-2026

How to Download GB/T 29482.1-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.