GB/T 18759.7-2017Electrical equipment of machines—Open numerical control system—Part 7: General technical specification (English PDF)
机械电气设备 开放式数控系统 第7部分：通用技术条件
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 18759.7-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 18759.7-2017 is the English-translated version of 机械电气设备 开放式数控系统 第7部分：通用技术条件.
GB/T 18759.7-2017 is Part 7 of the GB/T 18759 series on open numerical control (ONC) systems for the electrical equipment of machines, and gives their general technical requirements.
It applies to open CNC systems used in metal-working, textile, printing, sewing, plastics and rubber and woodworking machinery, and other similar uses may refer to it.
It covers openness, hardware platform, software platform, interface and communication requirements; basic and functional safety; climatic, mechanical, power supply and special environmental conditions; functions; design and manufacture, from marking and colours to grounding, conductor connections and component quality; electromagnetic compatibility; reliability; accompanying documents; packaging, storage and transport; and the manufacturer's warranty and customer service.
Annex A describes ONC system functions. It was issued on 31 July 2017 and has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 18759.7-2017
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- J 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 ONC system requirements
- 4.1 ONC system openness requirements
- 4.2 ONC system hardware platform requirements
- 4.3 ONC system software platform requirements
- 4.4 ONC system interface and communication requirements
- 5 ONC system security requirements
- 5.1 ONC system basic safety requirements
- 5.2 ONC system functional safety requirements
- 6 ONC system environmental requirements
- 6.1 Climatic and Environmental Requirements
- 6.2 Mechanical Environment Requirements
- 6.3 Power Environment Requirements
- 6.4 Special Environmental Requirements
- 7 ONC system functional requirements
- 8 ONC system design and manufacturing requirements
- 8.1 logo (logo)
- 8.2 Color Requirements
- 8.3 Appearance and Structure
- 8.4 Control element position
- 8.5 Functional grounding
- 8.6 Conductor connection
- 8.7 Component Quality
- 8.8 Convenience of operation and maintenance
- 9 EMC Requirements for ONC Systems
- 9.1 ONC system launch requirements
- 9.2 ONC system immunity requirements
- 10 ONC system reliability requirements
- 11 ONC system accompanying file requirements
- 12 ONC packaging, storage and transportation requirements
- 13 Manufacturer's warranty and customer service
- Appendix A (Informative) ONC System Functional Description
- References
Foreword
GB/T 18759 "mechanical and electrical equipment open CNC system" is divided into the following sections.
--- Part 1. General principles;
--- Part 2. Architecture;
--- Part 3. Bus interface and communication protocol;
--- Part 4. Hardware platform;
--- Part 5. Software platform;
--- Part 6. Network interface and communication protocol;
--- Part 7. General technical conditions;
--- Part 8. Test and acceptance.
This section GB/T 18759 Part 7.
This section drafted according to GB/T 1.1-2009 given rules.
1 Scope
GB/T 18759 provisions of this part of the mechanical and electrical equipment open CNC system of the common technical requirements.
This section applies to including metal processing machinery, textile machinery, printing machinery, sewing machinery, plastic rubber machinery, woodworking machinery, etc. Mechanical and electrical equipment used in open CNC system. Other similar uses of open CNC system can refer to this section.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
Industrial automation systems - Machine numerical control vocabulary
GB/T 8870.1-2012 Numerical control of automation systems and integrated machine tools - Program format and address word definitions - Part 1: Point, linear motion and contour control system data format
GB/T 18759.3-2009 Mechanical and electrical equipment Open CNC system Part 3: Bus interface and communication protocol
GB/T 18759.4-2014 Mechanical and electrical equipment open CNC system Part 4: Hardware platform
GB/T 18759.5-2016 Mechanical and electrical equipment open CNC system Part 5: Software platform
Industrial automation systems and integrated machine numerical control coordinate systems and motion naming (ISO. 2001, IDT)
GB 28526-2012 mechanical and electrical safety Safety related electrical, electronic and programmable electronic control system functional safety (IEC 62061:2005, IDT)
GB/T 29482.1-2013 Industrial machinery numerical control system Part 1: General technical conditions
3 Terms and definitions
GB/T 18759.1 ~ GB/T 18759.6 defined terms and definitions apply to this document. For ease of use, the following list is repeated Certain terms and definitions in GB/T 18759.1.
3.1 Open CNC system
Application software to build and follow the openness, scalability, compatibility principles of the system platform above the numerical control system, so that applications have Portability, maneuverability and human-machine interface consistency. [GB/T 18759.1-2002, Definition 3.1]
3.2 Hardware platform
The basic components of the software platform and application software are at the very bottom of the basic architecture. [GB/T 18759.1-2002, Definition 3.4]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 8870.1-2012Automation systems and integration -- Numerical control of machines -- Program format and definitions of address words -- Part 1: Data format for positioning, line motion and contouring control systems
- GB/T 18759.3-2009Electrical equipment of machines - Open numerical control system - Part 3: Fieldbus interface and communication protocol
- GB/T 18759.4-2014Electrical equipment of machines-Open numerical control system-Part 4: Hardware platform
- GB/T 18759.5-2016Electrical equipment of machines - Open numerical control system - Part 5: Software platform
- GB 28526-2012Electrical safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
- GB/T 29482.1-2013Numerical control system of industrial machines - Part 1: General requipments
Similar standards
How to Download GB/T 18759.7-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 28526-2012 — Electrical safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
GB/T 18759.3-2009 — Electrical equipment of machines - Open numerical control system - Part 3: Fieldbus interface and communication protocol
GB/T 18759.4-2014 — Electrical equipment of machines-Open numerical control system-Part 4: Hardware platform
Secure payment via Stripe
Payments accepted
GB/T 18759.7-2017
$295.00