GB/T 18759.5-2016Electrical equipment of machines - Open numerical control system - Part 5: Software platform (English PDF)

Foreword

GB/T 18759 "mechanical and electrical equipment open CNC system" is divided into the following parts.

Part 2. Architecture;

Part 3. Bus interface and communication protocol;

- Part 4. Hardware platform;

- Part 5. Software platform;

- Part 6. Network interface and communication protocol;

- Part 7. General technical conditions;

Part 8. Test and Acceptance.

This part is part 5 of GB/T 18759.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

This part is made by the China Machinery Industry Federation.

This part of the National Industrial Machinery Electrical System Standardization Technical Committee (SAC/TC231) centralized.

This part is responsible for the drafting unit. Shenyang high precision CNC Technology Co., Ltd., the State Machine Tool Quality Supervision and Inspection Center.

This part participates in the drafting unit. Shenyang Institute of Computing Technology, Chinese Academy of Sciences, Guangzhou CNC Equipment Co., Ltd., Beijing Kay

En Di CNC technology limited liability company, Beijing Aerospace CNC System Co., Ltd., Dalian Guangyang Technology Engineering Co., Ltd., Wuhan Huazhong NC

Co., Ltd., Shanghai Jiaotong University, Beijing University of Aeronautics and Astronautics, Shandong University, Zhejiang University, Shenyang Machine Tool (Group) Co., Ltd.,

Zhejiang Kaida Machine Tool Co., Ltd., Beijing easy to cubic Technology Co., Ltd.

This part of the main drafters. Yu Dong, Huang Zuguang, Yin Zhenyu, Hu Yi, Hu Tianliang, Yang Hongli, Wang Jian, Yang Tangyong, Feng Dongqin, Xue Ruijuan, Song Bao, Wang Qin.

1 Scope

This part of the provisions of the mechanical and electrical equipment open CNC system software platform construction and basic structure for the open CNC system

Software platform analysis, design and implementation of the reference frame to meet the mechanical and electrical equipment, CNC system open and interoperability requirements.

This part applies to metal processing machinery, textile machinery, printing machinery, sewing machinery, plastic and rubber machinery, woodworking machinery and other electrical facilities

Standby open CNC system. Other industrial machinery and equipment with the open CNC system can also refer to the implementation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 9387.1-1998 Information technology - Open systems interconnection - Basic reference model - Part 1. Basic model (ISO /

IEC 7498-1..1994, IDT)

GB/T 15969.3-2005 Programmable controllers - Part 3. Programming languages (IEC 61131-3..2002, IDT)

Mechanical electrical equipment - Open numerical control systems - Part 1. General principles GB/T 18759.1-2002

Mechanical and electrical equipment - Open numerical control systems - Part 2. Architecture - GB/T 18759.2-2006

GB/T 19769.1-2005 Functional blocks for industrial process measurement and control systems - Part 1. Structures (IEC 61499-1..2003, MOD)

3 terms and definitions, symbols and abbreviations