Valid

GB/T 29771.1-2013Numerical controller of industrial machines - Part 1: General requipments (English PDF)

工业机械数字控制器第1部分：通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (63 pages)

Need quotation for your management?

Get a formal quotation for GB/T 29771.1-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 10, 2013

Implementation date

February 1, 2014

Scope

GB/T 29771.1-2013 is the English-translated version of 工业机械数字控制器第1部分：通用技术条件.

GB/T 29771.1-2013 is the Chinese standard "Numerical controller of industrial machines - Part 1: General requipments".

Its scope clause reads: This section GB/T 29771 provisions of industrial machinery basic requirements of digital controller design, manufacture, inspection and application, including technical Operation requirements, test methods, inspection rules, marking, packaging, transportation, storage and accompanying technical documentation.

This section applies to rated voltage not exceeding AC1000V, DC1500V, rated frequency not exceeding 200Hz number of industrial machinery Word controller or digital control unit (hereinafter referred to as the controller), for example, metal-cutting machine tools, casting and forging machinery, woodworking machinery, machine tools, Plastic machinery, textile machinery, sewing machinery equipped with the controller. Other mechanical digital controller also can refer to this section.

Found what you need?

Document preview — GB/T 29771.1-2013

National Standard of the People's Republic of China

ICS: 21.010
Classification: J 09

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 5 composition
4.1 Overview
4.2 Composition
5.1 OVERVIEW
5.2 climatic conditions
5.3 mechanical conditions
5.4 Electrical Operating Conditions
5.5 7 special working conditions
6 Function
6.1 Overview
8 6.2 Function Deployment
6.3 interface signal
6.4 Communication
6.5 Human Interface
6.6 self-test and diagnostics
10 7.1 Protection against electric shock
7.2 Thermal Protection
7.3 Protection of mechanical hazards
7.4 Functional Safety
8 Electromagnetic compatibility (EMC) requirements
8.1 Overview
8.2 Emission Requirements
8.3 Immunity requirements
9 reliability requirements
10 Product file
10.1 Overview
10.2 Technical Paper
10.3 Manual
11 24 Design Requirements
11.1 General principles
11.2 Insulation
11.3 Degree of protection (IP value)
11.4 a power isolation
11.5 27 protection
11.6 Operation
11.7 indicates that the device
11.8 Cables and wiring
11.9 Structure
11.10 printed circuit board
11.11 29 EMC Design
12 tests and inspections
12.1 Overview
12.2 Function test
12.4 Climate Experiment
12.5 Mechanical environmental testing
12.6 Power variation test
12.7 Electromagnetic compatibility (EMC) Test
12.8 General electrical safety test
12.9 Printed Circuit Board Test
12.10 44 manufacturing quality inspection
12.11 45 Reliability Test
13 inspection requirements
13.1 Inspection classification
13.2 Inspection stereotypes
13.3 factory inspection
13.4 Type tests
14 packaging, storage and transport
14.1 Packaging
14.2 storage
14.3 Transport
14.4 Inspection
Appendix A (Informative Appendix) SIL determination and functional safety instructions
Annex C (informative) controller environmentally conscious design guidelines
References

1 Scope

This section GB/T 29771 provisions of industrial machinery basic requirements of digital controller design, manufacture, inspection and application, including technical

Operation requirements, test methods, inspection rules, marking, packaging, transportation, storage and accompanying technical documentation.

This section applies to rated voltage not exceeding AC1000V, DC1500V, rated frequency not exceeding 200Hz number of industrial machinery

Word controller or digital control unit (hereinafter referred to as the controller), for example, metal-cutting machine tools, casting and forging machinery, woodworking machinery, machine tools,

Plastic machinery, textile machinery, sewing machinery equipped with the controller. Other mechanical digital controller also can refer to this section.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 156 standard voltage (IEC 60038.2002, MOD)

GB/T 191 Packaging - Pictorial signs (ISO 780.1997, MOD)

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2. Test methods Test A. Cold (IEC 60068-2-

1.2007, IDT)

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2. Test methods Test B. Dry heat (IEC 60068-2-

2.2007, IDT)

GB/T 2423.3-2006 Environmental testing for electric and electronic products Part 2. Test methods - Test Cab. Damp heat test (IEC 60068-2-78.2001, IDT)

GB/T 2423.5-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ea and guidance. Shock (Idt IEC 60068-2-27. 1987)

GB/T 2423.8-1995 Environmental testing for electric and electronic products Part 2. Test methods Test Ed. Free fall (idt IEC 60068-2-32.1990)

GB/T 2423.10-2008 Environmental testing for electric and electronic products Part 2. Test methods Test Fc. Vibration (sinusoidal) (IEC 60068-2-6.1995, IDT)

GB/T 2423.17-2008 Environmental testing for electric and electronic products Part 2. Test methods - Test Ka. Salt (IEC 60068-2-11. 1981, IDT)

GB/T 2423.22-2002 Environmental testing for electric and electronic products Part 2. Test methods - Test N. Temperature change (Idt IEC 60068-2-14. 1984)

GB/T 2424.5 electric and electronic products environmental testing to confirm performance of temperature chambers

GB/T 2424.7 electric and electronic products environmental testing test A and B (with load) measure the temperature of the chamber

GB/T 2900.13-2008 Electrotechnical terminology credibility and quality of service (IEC 60050 (191).1990, IDT)

GB 4208-2008 housing protection (IP Code) (IEC 60529.2003, IDT)

GB/T 4365-2003 Electrotechnical terminology Electromagnetic compatibility (IEC 60050 (161).1990, IDT)

GB/T 4588.2-1996 metallized hole single and double sided printed specification (idt IEC /PQC90.1990)

GB/T 4588.4-1996 specification for multilayer printed boards (idt IEC /PQC91.1990) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 63 pages — is available in the English PDF.

Similar standards

GB/T 37414.2-2020|GB/T 37414.3-2020|GB/T 37414.1-2019|GB/T 13306-2011|GB/T 17889.7-2026|GB/T 17889.5-2025

How to Download GB/T 29771.1-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.