Valid

GB/T 24252-2019Silk quilts (English PDF)

蚕丝被

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/T 24252-2019 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 18, 2019

Implementation date

May 1, 2020

Scope

GB/T 24252-2019 is the English-translated version of 蚕丝被.

GB/T 24252-2019 is the Chinese national standard for silk quilts. It sets the requirements - the fibre used and its content, the mass and dimensions and their tolerances, the workmanship of the batt and of the cover, the safety and hygiene limits - and then the test methods, the inspection rules and the provisions on marking, packaging and storage.

It applies to quilts whose filling is mulberry or tussah silk floss, held in place by a tied or stitched batt, and quilts made from other silkworm species may follow it as a reference.

Manufacturers, buyers and testing laboratories use it to judge a batch. It replaces GB/T 24252-2009, was issued on 18 October 2019 and has applied since 1 May 2020.

Found what you need?

Document preview — GB/T 24252-2019

National Standard of the People's Republic of China

ICS
59.080
Classification
W 43
Replacing
GB/T 24252-2009

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GB/T 24252-2009 "silk quilt", compared with GB/T 24252-2009, the main technical changes are as follows.

---In the scope, the provisions of "Silk silk made from other silkworms as the main raw material can be referred to" (see Chapter 1,.2009)

Chapter 1 of the edition);

--- Revised the terminology and definition of "silk quilt" and "silk silk", added the terminology and definition of "silk quilt" and "small point", and deleted "filament Mian" "middle filament cotton" "short silk cotton" terms and definitions (see 3.1~3.3, 3.5,.2009 version 3.1~3.5);

--- Increased the safety performance of the tire cover and filler in the silk quilt should meet the requirements of GB 18401, among which infants and children's products The safety performance shall comply with the requirements of GB 31701 (see 4.3);

--- Modified fiber content, oil content, filler quality deviation rate and compression resilience requirements, increased filler silk length, residual glue Rate and requirements for fluorescent whitening agents (see 4.4, 4.3 edition of.2009);

--- Added the requirement that "silk fillers should not be subjected to weight gain treatment" (see 4.5);

--- Increased the appearance quality of the filler (see 4.6);

---Incorporate the "needle" requirements in the appearance quality into the "sewing quality" in the process quality (see 4.7, 4.4, 4.5 of the.2009 edition);

--- Increased the "filler quality of 500g and below products do not assess the degree of uniformity and the four corners, sides" provisions (see 4.7);

--- Added the requirement of "metal residues that may cause damage to the human body such as seamless needles and broken needles in silk" (see 4.9);

--- Revised the test method for fiber content, oil content, fluorescent whitening agent and water washing dimensional change rate (see Chapter 5,.2009 edition)

Chapter 5);

--- Increased safety performance, silk length and content, residual gel rate, silkworm weight gain identification, silk thread cleanliness and broken needles and other metal residues Test method for residues (see Chapter 5);

--- Revised the inspection items of the factory inspection (see 6.2.1, 6.2.1 of the.2009 edition);

--- Revised the specification of product specifications and fiber content (see 7.3, 7.4, 7.3, 7.4 of.2009 edition);

--- Amendment of Appendix A, added "representation of test results of filler fiber content" (see A.5.2 in Appendix A);

--- Appendix B is adjusted to "filling compression resilience test method", based on the original Appendix D, the test method has been modified and increased A schematic diagram of the test device was added, and the original chemical method for the determination of mulberry silk content in the mixed filler of mulberry and silkworm silk was deleted.

And refer to FZ/T 40005 (see Appendix B, Appendix B, Appendix D of the.2009 edition);

--- Appendix C is adjusted to "silk silk weight increase qualitative test acid dissolution color method", deleted the original Appendix C "oil rate test method" and Refer to FZ/T 40006 (see Appendix C, Appendix C of the.2009 edition);

--- Appendix D is adjusted to "silk cotton weight increase qualitative test high temperature acid hydrolysis method", the original Appendix D is changed to the current Appendix B (see Appendix B, Appendix D, Appendix D of the.2009 edition;

---Appendix E is adjusted to "Liquid Determination of Amino Acid Content in Silk", and the original Appendix E "Inspection Sampling Plan" is changed to the attached Record F (see Appendix E, Appendix F, Appendix E of the.2009 edition).

1 Scope

This standard specifies the requirements, test methods, inspection rules, marking, packaging and storage of silk quilts.

This standard is applicable to the production of silkworm cotton and tussah silk as the main raw material, and the tire is made and fixed with the tire cover (including machine seam and hand seam).

Into the silk quilt. Silk made from other silkworms as the main raw material can be referred to.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 250 Textile color fastness test for gray color card for color change

GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches plan

GB/T 2910 (all parts) Quantitative chemical analysis of textiles

GB/T 3920 Textile color fastness test color fastness to rubbing

GB/T 3921-2008 Textile color fastness test color fastness to soaping Test method for color fastness to perspiration of GB/T 3922 textiles

GB/T 5296.4 Instructions for use of consumer products - Part 4. Textiles and clothing

GB/T 5713 Textile color fastness test color fastness to water

GB/T 6529 Standard atmosphere for textile conditioning and testing

GB/T 6682 Analytical laboratory water specifications and test methods

GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values

GB/T 8629-2017 Home washing and drying procedures for textile testing

GB/T 8630 Determination of dimensional changes after washing and drying of textiles

GB/T 9994 textile material official moisture regain

GB/T 9995 Determination of moisture content and moisture regain of textile materials

GB 18401 National Textile Products Basic Safety Technical Specifications

GB/T 24121 Textile products broken needle residue detection method

GB/T 29862 Identification of textile fiber content

GB 31701 Safety technical specifications for infant and children textile products

GB/T 32016 Determination of silk amino acids GSB16-3452 mechanism silk silk cotton appearance grade standard sample

FZ/T 01137-2016 Determination of textile fluorescent whitening agents

FZ/T 40004 silk rubber content test method

FZ/T 40005 Determination of mulberry silk content in mulberry/sorghum products

FZ/T 40006 silk oil content test method

FZ/T 40009 silk cotton fiber length test method

FZ/T 41003 silkworm cotton ball

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 2910 · GB/T 5296.4

Similar standards

Editions of GB/T 24252

EditionTitleRevisionStatus
GB/T 24252-2019Silk quiltscurrent editionCurrent
GB/T 24252-2009Silk quiltsprevious editionSuperseded

This page sells the current edition, GB/T 24252-2019. Earlier editions are listed for reference only.

How to Download GB/T 24252-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 24252-2019

$325.00