GB/T 2423.43-2008Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests (English PDF)
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for GB/T 2423.43-2008 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine
Level / Type
National · Recommended
Issue date
May 19, 2008
Implementation date
January 1, 2009
Scope
GB/T 2423.43-2008 (Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests) is available as an English-translated PDF.
GB/T 2423.43-2008 is the Chinese standard "Environmental testing for electric and electronic products - Part 2: Test methods - Mounting of specimens for vibration, impact and similar dynamic tests".
Its scope clause reads: This Part of GB/T 2423 provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in GB/T 2423, that is impact (Test E), vibration (Test F) and acceleration, steady-state (Test G).
When they are fastened to the test apparatus and subjected to these tests, whether packaged or unpackaged, they are referred to as specimens. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 2423.43-2008
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- K 04
Issued by: General Administration of Quality Supervision, Inspection and Quarantine
Contents
- Foreword3
- Introduction5
- 1 Scope6
- 2 Normative references6
- 3 Terms and definitions6
- 4 General7
- 5 Mounting, where the specimen is a component7
- 6 Mounting, where the specimen is equipment and other articles8
- 7 Mounting, where the specimen is a packaged product8
- 8 Information to be given in the relevant specification10
- Annex A (Informative) General guidance16
- Annex B (Informative) Guidance on packaged products25
1 Scope
This Part of GB/T 2423 provides methods for mounting products, whether packaged or unpackaged, as well as mounting requirements for equipment and other articles, for the series of dynamic tests in GB/T 2423, that is impact (Test
E), vibration (Test F) and acceleration, steady-state (Test G). When they are fastened to the test apparatus and subjected to these tests, whether packaged or unpackaged, they are referred to as specimens.
2 Normative references
The following standards contain the provisions which, through reference in this
Part of GB/T 2423, constitute the provisions of this Part. For dated references, subsequent amendments (excluding corrections) or revisions do not apply to this Part. However, the parties who enter into agreement based on this Part are encouraged to investigate whether the latest versions of these documents are applicable. For undated reference documents, the latest versions apply to this
Part.
GB/T 2421-1999 Environmental testing for electric and electronic products
- Part 1. General and guidance (idt IEC 60068-1.1988);
GB/T 2423.39-1990 Basic environmental testing procedures for electric and electronic products - Test Ee. Bounce
GB/T 2298-1991 Mechanical vibration and shock - Terminology (neq ISO 2041.1990)
3 Terms and definitions
For the purposes of this document, the terms and definitions used in GB/T 2298-1991 and GB/T 2423 apply.
3.1 package
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2421-1999Environmental testing - General and guidance
- GB/T 2423.39-1990Environmental testing - Part 2: Test methods - Test Ee and guidance: Loose cargo testing including bounce
- GB/T 2298-1991Mechanical vibration, shock and condition monitoring -- Vocabulary
GB/T 2423 · IEC 60068
Cited by
- GB/T 45655-2025General modular electrical cabinets with narrow-sized dimensions
- GB/T 46367-2025Technical requirements and test methods for reliability of mobile telecommunication terminal
- GB/T 2424.25-2024Environmental testing - Part 3: Test guidance - Seismic test methods
- GB/T 44257.1-2024Traction batteries for electric earth-moving machinery - Part 1: Safety requirements
- GB/T 44993-2024On-site testing instruments of off-board charger for electric vehicles
- GB/T 20042.2-2023Proton exchange membrane fuel cell—Part 2: General technical specification of fuel cell stacks
How to Download GB/T 2423.43-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.10-2019 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 2423.101-2025 — Environmental testing - Part 2: Test methods - Test: Inclinations and swings
Secure payment via Stripe
Payments accepted
GB/T 2423.43-2008
$180.00