GB/T 46367-2025Technical requirements and test methods for reliability of mobile telecommunication terminal (English PDF)
移动通信终端可靠性技术要求和测试方法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 46367-2025 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 5, 2025
Implementation date
May 1, 2026
Scope
GB/T 46367-2025 is the English-translated version of 移动通信终端可靠性技术要求和测试方法.
GB/T 46367-2025 is the Chinese standard "Technical requirements and test methods for reliability of mobile telecommunication terminal". Its scope clause reads: This document specifies the technical requirements for the environmental adaptability and mechanical stress of mobile communication terminals, and describes the corresponding test methods.
This document applies to the reliability of mobile communication terminals and wearable devices, tablet computers, smart speakers, etc. that support communication functions. test.
Note. This document does not include environmental conditions such as fire, explosion, plasma radiation, or any other unpredictable accidents. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 46367-2025
National Standard of the People's Republic of China
- ICS
- 33.050.01
- Classification
- M 30
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions
- 4.Technical Requirements
- 4.1 Environmental adaptability
- 4.2 Mechanical Stress
- 5.Test Methods 7.
- 5.1 Test Requirements
- 5.2 Test Conditions
- 5.3 Environmental Testing
- 5.4 Mechanical Stress Test Methods
- References
1 Scope
This document specifies the technical requirements for the environmental adaptability and mechanical stress of mobile communication terminals, and describes the corresponding test methods.
This document applies to the reliability of mobile communication terminals and wearable devices, tablet computers, smart speakers, etc. that support communication functions.
test.
Note. This document does not include environmental conditions such as fire, explosion, plasma radiation, or any other unpredictable accidents.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.
This document.
GB/T 2423.1 Environmental testing of electrical and electronic products - Part 2.Test methods - Test A. Low temperature
GB/T 2423.2 Environmental testing of electrical and electronic products - Part 2.Test methods - Test B. High temperature
GB/T 2423.3 Environmental testing - Part 2.Test methods - Test Cab. Constant damp heat test
GB/T 2423.5 Environmental testing - Part 2.Test methods - Test Ea and guidelines. Impact
GB/T 2423.18 Environmental testing - Part 2.Test methods - Test Kb. Salt spray, alternating (sodium chloride solution)
GB/T 2423.22 Environmental testing - Part 2.Test methods - Test N. Temperature change
GB/T 2423.43 Environmental testing of electrical and electronic products - Part 2.Test methods - Vibration, shock and similar dynamic test specimens
Installation of products
GB/T 2423.56 Environmental testing - Part 2.Test methods - Test Fh. Broadband random vibration and guidelines
GB/T 4208-2017 Degrees of protection provided by enclosures (IP code)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Terminal devices that access mobile communication networks.
3.2 Device function terminal function
The basic functions of a mobile communication terminal.
YD/T 3708 | YD/T 3709 | YD/T 3710 | GB/T 46569 | GB/T 20068 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.5Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.18Environmental testing - Part 2: Test methods - Test Kb: Salt mist, cyclic (sodium chloride solution)
- GB/T 2423.22Environmental testing - Part 2: Test methods - Test N: Change of temperature
Editions of GB/T 46367
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 46367-2025 | Technical requirements and test methods for reliability of mobile telecommunication terminal | current edition | Current |
This page sells the current edition, GB/T 46367-2025. Earlier editions are listed for reference only.
How to Download GB/T 46367-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.10-2019 — Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 2423.101-2025 — Environmental testing - Part 2: Test methods - Test: Inclinations and swings
Secure payment via Stripe
Payments accepted
GB/T 46367-2025
$300.00