GB/T 23796-2009Surveillance methods for vector density - Fly (English PDF)
病媒生物密度监测方法 蝇类
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23796-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 4, 2009
Implementation date
December 1, 2009
Scope
GB/T 23796-2009 is the English-translated version of 病媒生物密度监测方法 蝇类.
GB/T 23796-2009 is the Chinese national method for measuring how many flies are present in a place, one of the vector density surveillance standards used in public health.
It describes the techniques - the cage trap, the sticky trap, the visual count and the grid method - and says what each one is good for: the cage trap, the sticky trap and the grid method measure the density of adult flies, while the visual method is used for density and for the rate of fly breeding sites.
It applies to the monitoring of fly density and of the species present. Health authorities and pest control services use it to compare seasons and districts. Issued on 4 May 2009, it has applied since 1 December 2009.
Found what you need?
Document preview — GB/T 23796-2009
National Standard of the People's Republic of China
- ICS
- 11.020
- Classification
- C 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Monitoring
Foreword
The Standard Appendix A, Appendix B is an informative annex.
This standard is proposed and administered by the People's Republic of China Ministry of Health.
This standard by the People's Republic of China Ministry of Health is responsible for interpretation.
Drafting of this standard. Shanghai Municipal Center for Disease Control and Prevention, Beijing Center for Disease Control and Prevention, the PLA Military Academy of Medical Sciences, Institute of Microbiology and Epidemiology, Disease Control and Prevention Division of the Ministry of Health (National Patriotic Sanitation), Beijing Patriotic Health Campaign Committee Office Public rooms.
1 Scope
This standard specifies the method for monitoring the density of flies, including cage traps, sticky catch method, visual method, grid method.
This standard applies to fly the density and type of monitoring, where the cage traps, sticky trap method and grid method is used to monitor the density of flies, visual method It used to monitor the density of flies and flies breeding rates.
2 Terms and definitions
The following terms and definitions apply to this standard.
2.1 Fly
Insecta Diptera Cyclorrhapha mesh petals have class, divided egg, larva, pupa and adult four instars.
2.2 Fly density
Within a certain period of time or space unit area to monitor the number of flies.
2.3 Fly breeding site
It flies in the presence of a suitable animal breeding corruption, corruption plant, human excrement, animal dung and garbage containers or location.
2.4 Standard room
To 15m2 as a standard room, which is less than 15m2 individual rooms are considered a standard room, more than 15m2 room 15m2 press
Each converted several standard rooms.
3 Monitoring
3.1 Cage traps
3.1.1 Scope
For outdoor adult flies density and type of monitoring.
3.1.2 Monitoring Tools
Catching flies cage. a diameter of 250mm, the cage body height 400mm, cage-foot-tall 100mm ~ 300mm, conical core high 350mm, top Straight Diameter 25mm (see Figure A.1).
3.1.3 Procedure
Each catch flies cage bait placed within the disc 50g brown sugar, vinegar 50mL and 50mL water, or in accordance with the purpose of monitoring the use of other bait.
Bait tray and catch flies cage along the gap should be less than 20mm. Monitoring time is 9.00 to 15.00 (or provided in accordance with the purpose of monitoring Fixed monitoring time). After capture flies anesthesia classification, counting and recording of temperature, humidity and wind speed and other weather data (see Table B.1).
3.1.4 Density calculation
Density calculation see formula (1).
(1) Where.
D --- flies density, in units of time per cage [only/(cage · h)];
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 16124-2025Technical specification for environmental health impact assessment of water conservancy and hydropower project
- GB/T 27772-2025Criteria for vector density control — Flies
- GB/T 45634-2025Prevention and control of insect-borne infectious diseases at frontier ports
- GB/T 39503-2020Specification for integrated vector management—School
- WS/T 687-2020Operating procedures for vector control
- WS/T 688-2020Operating rules for vector control
Similar standards
How to Download GB/T 23796-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 23796-2009
$165.00