Valid

NB/T 11640-2024Wireless remote control device for mining equipment (English PDF)

煤矿用采掘设备无线遥控装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 11640-2024 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

September 24, 2024

Implementation date

March 24, 2025

Scope

NB/T 11640-2024 is the English-translated version of 煤矿用采掘设备无线遥控装置.

NB/T 11640-2024 is the Chinese standard "Wireless remote control device for mining equipment". Its scope clause reads: This document specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, and other requirements of wireless remote control devices for coal mining equipment.

Packaging, transportation and storage. This document is applicable to wireless remote control devices for mining equipment used in underground coal mines, non-coal mines and open-pit coal mines (hereinafter referred to as device).

Found what you need?

Document preview — NB/T 11640-2024

National Standard of the People's Republic of China

ICS
29.260.20
Classification
D 98

Issued by: National Energy Administration of the People's Republic of China

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 12 h cycle)

1 Scope

This document specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, and other requirements of wireless remote control devices for coal mining equipment.

Packaging, transportation and storage.

This document is applicable to wireless remote control devices for mining equipment used in underground coal mines, non-coal mines and open-pit coal mines (hereinafter referred to as device).

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.

document.

GB/T 191 Pictorial markings for packaging, storage and transportation

GB/T 2423.1-2008 Environmental testing for electric and electronic products Part 2.Test methods Test A. Low temperature

GB/T 2423.2-2008 Environmental testing for electric and electronic products Part 2.Test methods Test B. High temperature

GB/T 2423.4-2008 Environmental testing for electric and electronic products Part 2.Test methods Test Db. Cyclic damp heat (12 h

12 h cycle)

GB/T 2423.5-2019 Environmental testing Part 2.Test methods Test Ea and guidance. Shock

GB/T 2423.7-2018 Environmental testing Part 2.Test methods Test Ec. Shock caused by rough operation (mainly used for

Equipment type sample)

GB/T 2423.10-2019 Environmental testing Part 2.Test methods Test Fc. Vibration (sinusoidal)

GB/T 3836.1 Explosive atmospheres Part 1.General requirements for equipment

GB/T 3836.2 Explosive atmospheres Part 2.Equipment protected by flameproof enclosure "d"

GB/T 3836.3 Explosive atmospheres Part 3.Equipment protected by increased safety "e"

GB/T 3836.4 Explosive atmospheres Part 4.Equipment protected by intrinsic safety type "i"

GB/T 3836.9 Explosive atmospheres Part 9.Equipment protected by encapsulation type "m"

GB/T 4208 Degrees of protection provided by enclosures (IP Code)

GB/T 9969 General Principles for Instructions for Use of Industrial Products

GB/T 10111 Random number generation and its application in product quality sampling inspection

GB/T 12173 General electrical equipment for mining

GB/T 17626.2 Electromagnetic compatibility test and measurement technology Electrostatic discharge immunity test

GB/T 17626.3 Electromagnetic compatibility test and measurement techniques Part 3.Radio frequency electromagnetic field radiated immunity test

GB/T 17626.4 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test

GB/T 17626.5 Electromagnetic compatibility test and measurement technology surge (shock) immunity test

AQ 1043 Mining Product Safety Signs and Labels

MT/T 210-1990 Basic test methods for electrical and electronic products used for communication, detection and control in coal mines

MT/T 899 Information transmission device for coal mines […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

MT/T 210-1990 · MT/T 899

Similar standards

How to Download NB/T 11640-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 11640-2024

$240.00