JB/T 9218-2015Non-destructive testing - Test method for penetrant testing (English PDF)
无损检测 渗透检测方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9218-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 9218-2015 is the English-translated version of 无损检测 渗透检测方法.
JB/T 9218-2015 is the Chinese standard "Non-destructive testing - Test method for penetrant testing". Its scope clause reads: This standard specifies the test method for penetrant testing.
This standard is applicable to test discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested.
It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc. The term "discontinuity" is used here in the sense that no evaluation concerning acceptability or non-acceptability is included.
Methods for determining and monitoring the practical properties of penetrant testing products to be used are specified in JB/T 7523, GB/T 18851.2 and GB/T 18851.3.
The basic rules which shall be complied with in the application of non-destructive testing specified in GB/T 5616 apply to this standard. Its clauses include terminologies and definitions.
Found what you need?
Document preview — JB/T 9218-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 9218-2007
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Terminologies and Definitions
- 4 Safety Precautions
- 5 General Principles
- 5.1 Personnel
- 5.2 Method Summary
- 5.3 Operating Sequence
- 5.4 Equipment
- 5.5 Effectiveness
- 6 Products, Sensitivity and Designation
- 6.1 Product Family
- 6.2 Testing Products
- 6.3 Sensitivity
- 6.4 Designation
- 7 Compatibility of Testing Materials with the Part(s) to be Tested
- 7.1 General
- 7.2 Compatibility of Penetrant Testing Products
- 7.3 Compatibility of Penetrant Testing Materials with Tested Parts
- 8 Test Procedure
- 8.1 Written Test Procedure
- 8.2 Preparation and Precleaning
- 8.3 Application of Penetrant
- 8.4 Excess Penetrant Removal
- 8.5 Application of Developer
- 8.6 Viewing
- 8.7 Recording
- 8.8 Post Cleaning and Protection
- 8.9 Retesting
- 9 Test Report
- Appendix A (Normative) Main Stages of the Penetrant Testing
- Appendix B (Normative) Verification of Penetrant Testing
- Bibliography
1 Scope
This standard specifies the test method for penetrant testing.
This standard is applicable to test discontinuities, e.g. cracks, laps, folds, porosity and lack of fusion, which are open to the surface of the material to be tested. It is mainly applied to metallic materials, but can also be performed on other materials, provided that they are inert to the test media and they are not excessively porous, examples of which are castings, forgings, welds, ceramics, etc.
The term "discontinuity" is used here in the sense that no evaluation concerning acceptability or non-acceptability is included.
Methods for determining and monitoring the practical properties of penetrant testing products to be used are specified in JB/T 7523, GB/T 18851.2 and GB/T 18851.3.
The basic rules which shall be complied with in the application of non-destructive testing specified in GB/T 5616 apply to this standard.
2 Normative References
The following documents for the application of this standard are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5097 Non-destructive Testing - Penetrant Testing and Magnetic Particle Testing - Viewing Conditions
GB/T 5616 Non-destructive Testing - Guidelines for Application
GB/T 9445 Non-destructive Testing - Qualification and Certification of Personnel
GB/T 12604.3 Non-destructive Testing - Terminology - Terms Used in Penetrant Testing
GB/T 18851.2 Non-destructive Testing - Penetrant Testing - Part 2: Testing of Penetrant Materials
GB/T 18851.3 Non-destructive Testing - Penetrant Testing - Part 3: Reference Test Blocks
GB/T 18851.4 Non-destructive Testing-Penetrant Testing - Part 4: Equipment
GB/T 18851.5 Non-destructive Testing - Penetrant Testing - Part 5: Penetrant Testing at Temperatures Higher than 50°C
GB/T 18851.6 Non-destructive Testing - Penetrant Testing - Part 6: Penetrant Testing at Temperatures Lower than 10°C
GB/T 20737 Non-destructive testing - General terms and definitions
JB/T 6064 Non-destructive Testing - General Specification for Penetration Test Block
JB/T 7523 Non-destructive Testing - Materials for Penetrant Testing
3 Terminologies and Definitions
For the purposes of this document, the terminologies and definitions specified in GB/T 12604.3 and GB/T 20737 apply.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5097Non-destructive testing--Penetrant testing and magnetic particle testing--Viewing conditions
- GB/T 5616Non-destructive testing—Guidelines for application
- GB/T 9445Non-destructive testing - Qualification and certification of personnels
- GB/T 12604.3Non-destructive testing -- Terminology -- Terms used in penetrant testing
- GB/T 18851.2Non-destructive testing-Penetrant testing-Part 2:Testing of penetrang materials
- GB/T 18851.3Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
Cited by
- GB/T 36166-2018Copper alloy rods and profiles for hydraulic components
- GB/T 34882-2017Induction hardening and tempering of iron and steel parts
- GB/T 34889-2017Carburizing or carbonitriding,quenching and tempering of steel parts
- JB/T 13012-2017Countercurrent contact aerated flotation columns
- GB/T 30852-2014Conductive copper and copper alloy profiles for traction motors
- GB/T 30853-2014Copper and copper alloy forged rings for traction motors
Similar standards
Editions of JB/T 9218
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9218-2015 | Non-destructive testing - Test method for penetrant testing | current edition | Current |
| JB/T 9218-2007 | Non-destructive testing - Test method for penetrant testing | previous edition | Superseded |
This page sells the current edition, JB/T 9218-2015. Earlier editions are listed for reference only.
How to Download JB/T 9218-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.3-2013 — Non-destructive testing -- Terminology -- Terms used in penetrant testing
GB/T 18851.2-2024 — Non-destructive testing-Penetrant testing-Part 2:Testing of penetrang materials
GB/T 18851.3-2008 — Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks
Secure payment via Stripe
Payments accepted
JB/T 9218-2015
$135.00