JB/T 6064-2015Non-destructive testing - General specification for penetrant test blocks (English PDF)
无损检测 渗透试块通用规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6064-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 6064-2015 is the English-translated version of 无损检测 渗透试块通用规范.
JB/T 6064-2015 is the Chinese standard "Non-destructive testing - General specification for penetrant test blocks". Its scope clause reads: This standard specifies classification, technical requirements, inspection methods, inspection rules, etc. of blocks (or penetrant blocks) for penetrant testing.
This standard is applicable to the type inspection and end-of-manufacturing inspection of penetrant blocks and can also serve as acceptance basis for the ordered goods of the users.
Note: the penetrant blocks to which this standard is applicable do not include Types 1 and 2 blocks specified in GB/T 18851.3. Its clauses include terms and definitions; classification.
Found what you need?
Document preview — JB/T 6064-2015
National Standard of the People's Republic of China
- Replacing
- JB/T 6064-2006
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Classification
- 5 Technical Requirements
- 5.1 Type A Block
- 5.2 Type B Block
- 5.3 Type C Block
- 6 Inspection Methods
- 6.1 Chemical Composition
- 6.2 Surface Roughness
- 6.3 Size
- 7 Inspection Rules
- 7.1 Batching Rules
- 7.2 Inspection Classification
- 7.3 Inspection Items
- 8 Marking
- 8.1 General Principles
- 8.2 Marking Format
- 8.3 Example
- 9 Marking and Label
- 10 Packaging, Transport and Storage
- Bibliography
1 Scope
This standard specifies classification, technical requirements, inspection methods, inspection rules, etc. of blocks (or penetrant blocks) for penetrant testing.
This standard is applicable to the type inspection and end-of-manufacturing inspection of penetrant blocks and can also serve as acceptance basis for the ordered goods of the users.
Note: the penetrant blocks to which this standard is applicable do not include Types 1 and 2 blocks specified in GB/T 18851.3.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 3190 Wrought Aluminium and Aluminium Alloy - Chemical Composition
GB/T 4237 Hot Rolled Stainless Steel Plate Sheet and Strip
GB/T 5231 Designation and Chemical Composition of Wrought Copper and Copper Alloys
GB/T 12604.3 Non-destructive Testing – Terminology - Terms Used in Penetrant Testing
GB/T 19001 Quality Management Systems - Requirements
GB/T 27025 General Requirements for the Competence of Testing and Calibration Laboratories
JB/T 7523 Non-destructive Testing - Materials for Penetrant Testing
3 Terms and Definitions
For the purpose of this document, the terms and definitions given in GB/T 12604.3 apply.
4 Classification
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3190Chemical composition of wrought aluminium and aluminium alloys
- GB/T 4237Hot rolled stainless steel plate, sheet and strip
- GB/T 5231Designation and chemical composition of wrought copper and copper alloys
- GB/T 12604.3Non-destructive testing -- Terminology -- Terms used in penetrant testing
- GB/T 19001Quality management systems -- Requirements
- GB/T 27025General requirements for the competence of testing and calibration laboratories
Cited by
- JB/T 13470-2018Non-destructive testing - Test method for fluorescent penetrant testing of ceramic balls
- GB/T 34370.4-2017Nondestructive testing of amusement equipments—Part 4: Penetrant testing
- JB/T 9218-2015Non-destructive testing - Test method for penetrant testing
- NB/T 20328.4-2015Another code of non-destructive testing for mechanical components in nuclear island of nuclear power plants - Part 4: Penetrant testing
- NB/T 47013.5-2015Nondestructive testing of pressure equipments - Part 5: Penetrant testing
- JB/T 6012.5-2014Internal combustion engines - Intake and exhaust valves - Part 5: Fluorescent penetrant testing
Similar standards
Editions of JB/T 6064
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6064-2015 | Non-destructive testing - General specification for penetrant test blocks | current edition | Current |
| JB/T 6064-2006 | Non-destructive testing - General specification for penetrant test blocks | previous edition | Superseded |
This page sells the current edition, JB/T 6064-2015. Earlier editions are listed for reference only.
How to Download JB/T 6064-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12604.3-2013 — Non-destructive testing -- Terminology -- Terms used in penetrant testing
GB/T 19001-2016 — Quality management systems -- Requirements
GB/T 27025-2019 — General requirements for the competence of testing and calibration laboratories
Secure payment via Stripe
Payments accepted
JB/T 6064-2015
$125.00