JB/T 7693-2013Drive Shaft Assembly for Wheel Loader - Technical Specification (English PDF)
轮胎式装载机用传动轴总成 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 7693-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 7693-2013 is the English-translated version of 轮胎式装载机用传动轴总成 技术条件.
JB/T 7693-2013 is the recommended Chinese machinery industry standard giving the technical specification for the drive shaft assembly of wheel loaders. Its subject is the cross-type universal joint shaft assembly, abbreviated in the text as the BU shaft.
The standard sets the requirements for that assembly and the test methods used on it, then the inspection rules and the provisions for marking, packaging, transport and storage.
It is written for the drive shafts fitted to wheeled loaders. Among the standards it quotes are GB/T 2828.1-2012, GB/T 2829, GB/T 9239.1-2006, GB/T 15822.1, JB/T 3232, JB/T 5945-1991, JB/T 8409, JB/T 8925, QC/T 523 and YB/T 5209. It replaces JB/T 7693-1995.
Found what you need?
Document preview — JB/T 7693-2013
National Standard of the People's Republic of China
- ICS
- 53.100
- Replacing
- JB/T 7693-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 7693-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 7693-1995.
2 Scope
This standard is the recommended Chinese machinery industry standard giving the technical specification for the drive shaft assembly of wheel loaders. Its subject is the cross-type universal joint shaft assembly, abbreviated in the text as the BU shaft. The standard sets the requirements for that assembly and the test methods used on it, then the inspection rules and the provisions for marking, packaging, transport and storage. It is written for the drive shafts fitted to wheeled loaders. Among the standards it quotes are GB/T 2828.1-2012, GB/T 2829, GB/T 9239.1-2006, GB/T 15822.1, JB/T 3232, JB/T 5945-1991, JB/T 8409, JB/T 8925, QC/T 523 and YB/T 5209. It replaces JB/T 7693-1995.
3 Normative references
JB/T 7693-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 2829
GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
GB/T 15822.1
JB/T 3232
JB/T 5945-1991 — Construction machinery - General technical specifications for assembly
JB/T 8409
JB/T 8925
QC/T 523
YB/T 5209
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 7693-1995 (earlier edition)
6 Classification and status
International classification (ICS): 53.100
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 9239.1-2006Mechanical vibration—Rotor balancing—Part 1:Introduction
- GB/T 15822.1Non-destructive testing - Magnetic particle testing - Part 1: General principles
- JB/T 3232Rolling bearings - Needle roller bearings for universal joints
- JB/T 5945-1991Construction machinery - General technical requirements for assembly
Similar standards
Editions of JB/T 7693
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 7693-2013 | Drive Shaft Assembly for Wheel Loader - Technical Specification | current edition | Current |
| JB/T 7693-1995 | Drive Shaft Assembly for Wheel Loader - Technical Specification | previous edition | Superseded |
This page sells the current edition, JB/T 7693-2013. Earlier editions are listed for reference only.
How to Download JB/T 7693-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15822.1-2005 — Non-destructive testing -- Magnetic particle testing -- Part 1: General principles
GB/T 15822.1-2024 — Non-destructive testing - Magnetic particle testing - Part 1: General principles
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Secure payment via Stripe
Payments accepted
JB/T 7693-2013
$105.00