Valid

JB/T 2886-2008Trapezoidal lead screws and nuts for machine tools - Technical requirements (English PDF)

机床梯形丝杠、螺母 技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 2886-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

June 4, 2008

Implementation date

November 1, 2008

Scope

JB/T 2886-2008 is the English-translated version of 机床梯形丝杠、螺母 技术条件.

JB/T 2886-2008 is a recommended Chinese machinery industry standard giving the technical requirements for trapezoidal lead screws and nuts used in machine tools.

It sets out terms and definitions for the screw and the nut, the accuracy requirements, and the methods of testing them.

It applies to single start trapezoidal screws and nuts serving transmission and positioning duties in machine tools, whose thread profile angle conforms to GB/T 5796.1 and whose pitch and diameter conform to GB/T 5796.2; screws and nuts of other, non-standard profile angles may also be made to it. It replaces JB/T 2886-1992 and is classified as J51 and 25.080.01.

Found what you need?

Document preview — JB/T 2886-2008

National Standard of the People's Republic of China

ICS
25.080.01
Replacing
JB/T 2886-1992

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Electroplated Inner Cutting Disc
  • 3.2 Electroplated Needle File
  • 3.3 Electroplated Grinding Head
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Performance
  • 4.3 Safety and protection
  • 4.4 Castings, forgings and weldments
  • 4.5 Machining
  • 4.6 No-load operation requirements
  • 4.7 Load operation requirements
  • 4.8 Motion accuracy
  • 5 Test methods
  • 5.1 Appearance
  • 5.2 Protection requirements
  • 5.3 Machining and assembly quality of components
  • 5.4 Appearance quality
  • 5.5 Installation requirements for fire extinguishers
  • 5.6 Functional test requirements
  • 5.7 Anti-interference capability and functional stability test requirements
  • 5.8 Mass per unit area
  • 5.9 Tensile breaking force
  • 6 Inspection rules
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 6.3 Joint surfaces
  • 6.4 Numerical control system
  • 6.5 Working fluid system
  • 6.6 Lubrication system
  • 6.7 Machine running test
  • 6.8 Accuracy inspection
  • 6.9 Others
  • 7 Marking, packaging, transportation and storage
  • 7.2 Machining and assembly of components
  • 7.9 Load operation test
  • 8.1 General
  • 8.2 Inspection principles
  • 8.3 Inspection items
  • 8.4 Conformity judgment
  • 8.5 Storage
  • 9.1 Marking
  • 9.2 Packaging
  • 9.3 Transportation

1 Foreword

JB/T 2886-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.

It replaces the earlier edition JB/T 2886-1992.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard giving the technical requirements for trapezoidal lead screws and nuts used in machine tools. It sets out terms and definitions for the screw and the nut, the accuracy requirements, and the methods of testing them. It applies to single start trapezoidal screws and nuts serving transmission and positioning duties in machine tools, whose thread profile angle conforms to GB/T 5796.1 and whose pitch and diameter conform to GB/T 5796.2; screws and nuts of other, non-standard profile angles may also be made to it. It replaces JB/T 2886-1992 and is classified as J51 and 25.080.01.

JB/T 2886-2008 falls under ICS 25.080.01, in the field of manufacturing engineering.

This catalogue holds 1,459 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191-2008 — Packaging - Pictorial marking for handling of goods

GB/T 4879-1999 — Rustproof packaging

GB/T 5796.1-2005 — Trapezoidal screw threads - Part 1: Profiles

GB/T 5796.2-2005 — Trapezoidal screw threads - Part 2: General plan

GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions

JB/T 8356.1-1996 — Packaging of machine tools - Technical specifications

JB/T 8356.3-1996 — Small and medium wooden boxes for packing of machine tools

4 Where this standard sits

It cites 7 standards, among them GB/T 191-2008, GB/T 4879-1999, GB/T 5796.1-2005, listed in full above.

5 other standards in this catalogue cite it, among them JB/T 11441-2013, JB/T 2858.3-2017, JB/T 2858.4-2019.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other editions:

JB/T 2886-1992 (earlier edition)

Standards on related subjects:

GB/T 17587.3-2017 — Ball screws -- Part 3: Acceptance conditions and acceptance tests

JB/T 12396-2015 — Proportional valve solenoids

JB/T 6105-2007 — Hydraulic power units for NC machine tools - Technical requirements

JB/T 5244-2021 — Electromagnets for hydraulic valves

JB/T 3022-2021 — Micro Switch

JB/T 9893-2020 — Ball screws - Ball nuts - Mounting and connecting dimensions

7 Classification and status

International classification (ICS): 25.080.01

Chinese Standard Classification (CCS): J 51

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 2886

EditionTitleRevisionStatus
JB/T 2886-2008Trapezoidal lead screws and nuts for machine tools - Technical requirementscurrent editionCurrent
JB/T 2886-1992Trapezoidal lead screws and nuts for machine tools - Technical requirementsprevious editionSuperseded

This page sells the current edition, JB/T 2886-2008. Earlier editions are listed for reference only.

How to Download JB/T 2886-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 2886-2008

$195.00