JB/T 9925.1-2019Worm grinding machines - Part 1: Testing of accuracy (English PDF)
蜗杆磨床 第1部分:精度检验
This is a limited preview
Buy now to download the full PDF (18 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9925.1-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 2, 2019
Implementation date
May 2, 2019
Scope
JB/T 9925.1-2019 is the English-translated version of 蜗杆磨床 第1部分:精度检验.
JB/T 9925.1-2019 is part 1 of a recommended Chinese machinery industry standard on worm grinding machines, and it covers the testing of their accuracy.
It gives the inspection methods and the corresponding tolerances for the geometric accuracy and the working accuracy of these machine tools, and for the positioning and repeat positioning accuracy of their axes.
The part applies to worm grinders of ordinary accuracy with a maximum workpiece diameter of 125 mm to 320 mm and a maximum workpiece length of 500 mm to 4000 mm.
Classified J56 and 25.080.99, it builds on GB/T 17421.1-1998 and GB/T 17421.2-2016, the machine tool test code, and on GB/T 19660-2005 and JB/T 2886-2008. It replaced JB/T 9925.1-1999. It was issued on 2 May 2019.
Found what you need?
Document preview — JB/T 9925.1-2019
National Standard of the People's Republic of China
- ICS
- 25.080.99
- Replacing
- JB/T 9925.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Electroplated Inner Cutting Disc
- 3.2 Electroplated Needle File
- 3.3 Electroplated Grinding Head
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Performance
- 4.3 Safety and protection
- 4.4 Castings, forgings and weldments
- 4.5 Machining
- 4.6 No-load operation requirements
- 4.7 Load operation requirements
- 4.8 Motion accuracy
- 5 Test methods
- 5.1 Appearance
- 5.2 Protection requirements
- 5.3 Machining and assembly quality of components
- 5.4 Appearance quality
- 5.5 Installation requirements for fire extinguishers
- 5.6 Functional test requirements
- 5.7 Anti-interference capability and functional stability test requirements
- 5.8 Mass per unit area
- 5.9 Tensile breaking force
- 6 Inspection rules
- 6.1 Factory inspection
- 6.2 Type inspection
- 6.3 Joint surfaces
- 6.4 Numerical control system
- 6.5 Working fluid system
- 6.6 Lubrication system
- 6.7 Machine running test
- 6.8 Accuracy inspection
- 6.9 Others
- 7 Marking, packaging, transportation and storage
- 7.2 Machining and assembly of components
- 7.9 Load operation test
- 8.1 General
- 8.2 Inspection principles
- 8.3 Inspection items
- 8.4 Conformity judgment
- 8.5 Storage
- 9.1 Marking
- 9.2 Packaging
- 9.3 Transportation
1 Foreword
JB/T 9925.1-2019 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 2 May 2019 and took effect the same day.
It replaces the earlier edition JB/T 9925.1-1999.
It is one of 3 parts of the JB/T 9925 series.
2 Scope Preview
This standard is part 1 of a recommended Chinese machinery industry standard on worm grinding machines, and it covers the testing of their accuracy. It gives the inspection methods and the corresponding tolerances for the geometric accuracy and the working accuracy of these machine tools, and for the positioning and repeat positioning accuracy of their axes. The part applies to worm grinders of ordinary accuracy with a maximum workpiece diameter of 125 mm to 320 mm and a maximum workpiece length of 500 mm to 4000 mm. Classified J56 and 25.080.99, it builds on GB/T 17421.1-1998 and GB/T 17421.2-2016, the machine tool test code, and on GB/T 19660-2005 and JB/T 2886-2008. It replaced JB/T 9925.1-1999.
JB/T 9925.1-2019 falls under ICS 25.080.99, in the field of manufacturing engineering.
This catalogue holds 1,459 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
GB/T 17421.2-2016 — Test code for machine tools - Part 2: Determination of accuracy and repeatability positioning numerically controlled axes
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
JB/T 2886-2008 — Trapezoidal lead screws and nuts for machine tools - Technical requirements
4 Where this standard sits
It cites 4 standards, among them GB/T 17421.1-1998, GB/T 17421.2-2016, GB/T 19660-2005, listed in full above.
It is one part of the JB/T 9925 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 18 pages
6 Related standards
Other parts of this standard:
JB/T 9925.2-1999 — Worm grinding machines - Technical requirements
JB/T 9925.2-2014 — Worm Grinding Machines - Part 2: Specifications
Other editions:
JB/T 9925.1-1999 (earlier edition)
7 Classification and status
International classification (ICS): 25.080.99
Chinese Standard Classification (CCS): J 56
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 17421.1-1998Test code for machine tools - Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- GB/T 17421.2-2016Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- GB/T 19660-2005Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
- JB/T 2886-2008Trapezoidal lead screws and nuts for machine tools - Technical requirements
Similar standards
Editions of JB/T 9925.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9925.1-2019 | Worm grinding machines - Part 1: Testing of accuracy | current edition | Current |
| JB/T 9925.1-1999 | Worm grinding machines - Part 1: Testing of accuracy | previous edition | Superseded |
This page sells the current edition, JB/T 9925.1-2019. Earlier editions are listed for reference only.
How to Download JB/T 9925.1-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17421.1-1998 — Test code for machine tools. Part 1: Geometric accuracy of machines operating under no-load or finishing conditions
GB/T 17421.2-2016 — Test code for machine tools - Part 2: Determination of accuracy and repeatability positioning numerically controlled axes
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
JB/T 9925.1-2019
$315.00