JB/T 12420-2015Polyetheretherketone moulding compounds for electrical purposes (English PDF)
电气用聚醚醚酮模塑料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12420-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 12420-2015 is the English-translated version of 电气用聚醚醚酮模塑料.
JB/T 12420-2015 is a recommended Chinese machinery industry standard dealing with polyetheretherketone moulding compounds for electrical purposes. The document fixes their classification, the requirements they must meet, the test methods, the inspection rules and the marking, packaging, transport and storage provisions.
Its field of application is polyetheretherketone moulding compound in powder and granular form intended for electrical use. Among the standards it quotes are GB/T 1034-2008, GB/T 1040.2-2006, GB/T 1409-2006, GB/T 1634.2-2004, GB/T 2408-2008, GB/T 9341-2008 and GB/T 17037.4-2003.
It carries the Chinese classification K15 and the international classification 29.035.20, and the Ministry of Industry and Information Technology issued it.
Found what you need?
Document preview — JB/T 12420-2015
National Standard of the People's Republic of China
- ICS
- 29.035.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 12420-2015 was issued by MIIT on 10 October 2015 and has been in force since 1 March 2016.
2 Scope
This standard is a recommended Chinese machinery industry standard dealing with polyetheretherketone moulding compounds for electrical purposes. The document fixes their classification, the requirements they must meet, the test methods, the inspection rules and the marking, packaging, transport and storage provisions. Its field of application is polyetheretherketone moulding compound in powder and granular form intended for electrical use. Among the standards it quotes are GB/T 1034-2008, GB/T 1040.2-2006, GB/T 1409-2006, GB/T 1634.2-2004, GB/T 2408-2008, GB/T 9341-2008 and GB/T 17037.4-2003. It carries the Chinese classification K15 and the international classification 29.035.20, and the Ministry of Industry and Information Technology issued it.
3 Normative references
JB/T 12420-2015 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1034-2008 — Plastics -- Determination of water absorption
GB/T 1040.1-2006
GB/T 1040.2-2006
GB/T 1040.4-2006 — Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
GB/T 1408.1-2006
GB/T 1409-2006 — Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths
GB/T 1410-2006 — [Replaced by GB/T 31838.2-2019] Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1634.2-2004
GB/T 1843-2008 — Plastics - Determination of izod impact strength
GB/T 2408-2008
GB/T 9341-2008 — Plastics -- Determination of flexural properties
GB/T 11026.1-2003
GB/T 17037.4-2003 — Plastic -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 29.035.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1033.1-2008Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
- GB/T 1034-2008Plastics -- Determination of water absorption
- GB/T 1040.1-2006Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2-2006Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1040.4-2006Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- GB/T 1408.1-2006Insulating materials -- Test methods for electric strength -- Part 1: Test at power frequencies
Similar standards
How to Download JB/T 12420-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1033.1-2008 — Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method
GB/T 1034-2008 — Plastics -- Determination of water absorption
GB/T 1040.4-2006 — Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
Secure payment via Stripe
Payments accepted
JB/T 12420-2015
$135.00