Valid

JB/T 11434-2013Separating-type minor grain mills (English PDF)

分离式杂粮碾米机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11434-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 11434-2013 is the English-translated version of 分离式杂粮碾米机.

JB/T 11434-2013 is a recommended standard of the Chinese machinery industry for the separating-type minor grain mill. It sets out the product types, the technical requirements, the safety requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.

It applies to the various types of separating-type minor grain mill. The standard supersedes JB/T 9792.2-1999 and JB/T 9792.3-1999.

It is classified B93 in the Chinese system and 65.060.99 internationally, and among the standards it quotes are GB/T 191, GB/T 2490-2007, GB/T 2828.1-2003, GB/T 3785.1, GB/T 5491, GB/T 5502, GB/T 8231, GB/T 9239.1-2006, GB 10396-2006 and GB/T 12620.

Found what you need?

Document preview — JB/T 11434-2013

National Standard of the People's Republic of China

ICS
65.060.99
Replacing
JB/T 9792.3-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 11434-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry for the separating-type minor grain mill. It sets out the product types, the technical requirements, the safety requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to the various types of separating-type minor grain mill. The standard supersedes JB/T 9792.2-1999 and JB/T 9792.3-1999. It is classified B93 in the Chinese system and 65.060.99 internationally, and among the standards it quotes are GB/T 191, GB/T 2490-2007, GB/T 2828.1-2003, GB/T 3785.1, GB/T 5491, GB/T 5502, GB/T 8231, GB/T 9239.1-2006, GB 10396-2006 and GB/T 12620.

JB/T 11434-2013 falls under ICS 65.060.99, in the field of agriculture.

This catalogue holds 368 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 2490-2007 — Bonded abrasive products - Hardness grade measurement

GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan

GB/T 3785.1

GB/T 5491

GB/T 5492

GB/T 5493

GB/T 5494

GB/T 5495

GB/T 5497

GB/T 5498

GB/T 5502

GB/T 5503

GB/T 8231

GB/T 8232

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 9480

GB 10396-2006 — Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Safety signs and hazard pictorials -- General principles

GB/T 11766

GB/T 12620

GB/T 1330

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 12785-2014 — Test methods for submersible motor-pumps

GB 10395.19-2010 — Agricultural and forestry machinery - Safety - Part 19:Centre pivot and moving lateral types irrigation machines

JB/T 10600-2006 — Vertical self-priming pumps

JB/T 14922-2025 — Straw extruder

JB/T 11439-2013 — Reliability Assessment Methods for Choppers

JB/T 11438-2013 — Total Mixed Ration Diet Mixer

6 Classification and status

International classification (ICS): 65.060.99

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 1330

Similar standards

Editions of JB/T 11434

EditionTitleRevisionStatus
JB/T 11434-2013Separating-type minor grain millscurrent editionCurrent
JB/T 9792.3-1999Separating-type minor grain millsprevious editionSuperseded

This page sells the current edition, JB/T 11434-2013. Earlier editions are listed for reference only.

How to Download JB/T 11434-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 11434-2013

$195.00