Valid

JB/T 10205-2010Hydraulic cylinder (English PDF)

液压缸

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 10205-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 10205-2010 is the English-translated version of 液压缸.

JB/T 10205-2010 is the Chinese standard "Hydraulic cylinder". Its scope clause reads: This standard specifies the classifications, basic parameters, technical requirements, test methods, inspection rules and requirements for packing and transport of single-acting and double-acting hydraulic cylinders.

This standard is applicable to the single-acting and double-acting hydraulic cylinders with the nominal pressure being less than 31.5MPa and the operating medium being hydraulic oil or other mineral oils with equivalent performances.

The hydraulic cylinder with the nominal pressure higher than 31.5MPa may refer to this standard. Special requirements other than those specified in this standard shall be negotiated by the manufacturer and the user of the hydraulic cylinder. Its clauses include terms and definitions.

Found what you need?

Document preview — JB/T 10205-2010

National Standard of the People's Republic of China

ICS
23.100.20
Replacing
JB/T 10205-2000

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Items, Symbols and Units
  • 5 Classifications, Marks and Basic Parameters
  • 5.1 Classifications
  • 5.2 Marks
  • 5.3 Basic Parameters
  • 6 Technical Requirements
  • 6.1 General Requirements
  • 6.2 Performance Requirements
  • 6.3 Assembly Quality
  • 6.4 Appearance Requirements
  • 7 Performance Test Methods
  • 7.1 Test Apparatus
  • 7.2 Test Oil
  • 7.3 Test Items and Test Methods
  • 8 Inspection Methods for Assembly and Appearance
  • 9 Test Report
  • 10 Inspection Rules
  • 10.1 Inspection Classification
  • 10.2 Sampling
  • 10.3 Judgment Rules
  • 11 Mark, Operation Instruction, Package, Storage and Transport
  • 12 Labeling Explanation (in Referring to this Standard)
  • Bibliography

1 Scope

This standard specifies the classifications, basic parameters, technical requirements, test methods, inspection rules and requirements for packing and transport of single-acting and double-acting hydraulic cylinders.

This standard is applicable to the single-acting and double-acting hydraulic cylinders with the nominal pressure being less than 31.5MPa and the operating medium being hydraulic oil or other mineral oils with equivalent performances. The hydraulic cylinder with the nominal pressure higher than 31.5MPa may refer to this standard. Special requirements other than those specified in this standard shall be negotiated by the manufacturer and the user of the hydraulic cylinder.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest editions of these documents are applicable. For undated references, the latest editions of the normative documents referred to apply.

GB/T 786.1 "Fluid Power Systems and Components -- Graphic Symbols and Circuit Diagrams -- Part 1: Graphic Symbols for Conventional Use and Data Processing Applications" (GB/T 786.1-2009, ISO 1219-1: 2006, IDT)

GB/T 2346 "Fluid Power Systems and Components -- Nominal Pressures" (GB/T 2346-2003, ISO 2944: 2000, MOD)

GB/T 2348 "Fluid Power Systems and Components -- Cylinder Bores and Piston Rod Diameters" (GB/T 2348-1993, neq ISO 3320: 1987)

GB/T 2350 "Fluid Power Systems and Components -- Cylinders, Piston Rod Thread Dimensions and Types" (GB/T 2350-1980, eqv ISO 4395: 1978)

GB/T 2828.1-2003 "Sampling Procedures for Inspection by Attributea -- Part 1: Sampling Schemes Indexed by Acceptance Quality Limit (AQL) for Lot-by-lot Inspection" (ISO 2859-1: 1999, IDT)

GB/T 2878 "Fluid Power Systems and Components -- Ports -- Dimensions and Design" (GB/T 2878-1993, neq ISO 6149: 1980)

GB/T 2879 "Hydraulic Fluid Power -- Cylinder -- Housing for Piston and Rod Seals in Reciprocating Applications -- Dimensions and Tolerances" (GB/T 2879-2005, ISO 5597: 1987, IDT)

GB/T 2880 "Hydraulic Fluid Power -- Cylinder Rod and Piston Seals for Reciprocating Applications--Dimensions and Tolerances of Housing--Narrow Section Series"

GB/T 6577 "Hydraulic Fluid Power -- Cylinders -- Piston Seal Housings Incorporating Bearing Rings -- Dimensions and Tolerances" (GB/T 6577-1986, neq ISO 6574: 1981)

GB/T 6578 "Hydraulic Fluid Power -- Cylinder -- Reciprocating -- Housing for Rod Wipers -- Dimensions and Tolerances" (GB/T 6578-2008, ISO 6195: 2002, MOD)

GB/T 7935-2005 "Hydraulic Fluid Power -- General Requirements for Hydraulic Components"

GB/T 9286-1998 "Paints and Varnishes--Cross Cut Test for Films" (eqv ISO 2409: 1992)

GB/T 9969 "General Principles for Preparation of Instructions for Use of Industrial Products"

GB/T 13306 "Plates"

GB/T 14039-2002 "Hydraulic Fluid Power -- Fluids -- Method for Coding the Level of Contamination by Solid Particles" (ISO 4406: 1999, MOD)

GB/T 15622-2005 "Hydraulic Fluid Power -- Test Method for the Cylinders" (ISO 10100: 2001, MOD)

GB/T 17446 "Fluid Power Systems and Components -- Vocabulary" (GB/T 17446-1998, idt ISO 5598: 1985)

JB/T 7858-2006 "Method to Determine Cleanliness and Acceptance Criterions for Hydraulic Components"

3 Terms and Definitions

For the purposes of this standard, the terms and definitions given in GB/T 17446 and those below apply.

3.1 Sliding ring type combined seal

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Similar standards

Editions of JB/T 10205

EditionTitleRevisionStatus
JB/T 10205-2010Hydraulic cylindercurrent editionCurrent
JB/T 10205-2000Hydraulic cylinderprevious editionSuperseded

This page sells the current edition, JB/T 10205-2010. Earlier editions are listed for reference only.

How to Download JB/T 10205-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 10205-2010

$145.00