HG/T 2602-2011Vertical rubber bale cutters (English PDF)
立式切胶机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2602-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2602-2011 is the English-translated version of 立式切胶机.
Vertical rubber bale cutters are the subject of HG/T 2602-2011, a recommended standard of the Chinese chemical industry. The document sets the machine models and basic parameters, the general and safety requirements, the tests, the inspection rules and the provisions for marking, packaging, transport and storage.
It applies to vertical cutting machines used for rubber of all kinds. Among the standards it cites are GB/T 191, GB/T 1184-1996, GB 2893, GB/T 3766, GB 5226.1-2008, GB/T 7932-1997, GB/T 8196, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3120, HG/T 3228 and JB/T 5923, JB/T 5995, JB/T 8115 and JB/T 10205.
It supersedes HG/T 2602-1994. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2602-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2602-1994
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2602-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2602-1994.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Vertical rubber bale cutters are the subject of HG/T 2602-2011, a recommended standard of the Chinese chemical industry. The document sets the machine models and basic parameters, the general and safety requirements, the tests, the inspection rules and the provisions for marking, packaging, transport and storage. It applies to vertical cutting machines used for rubber of all kinds. Among the standards it cites are GB/T 191, GB/T 1184-1996, GB 2893, GB/T 3766, GB 5226.1-2008, GB/T 7932-1997, GB/T 8196, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 2108, HG/T 3120, HG/T 3228 and JB/T 5923, JB/T 5995, JB/T 8115 and JB/T 10205. It supersedes HG/T 2602-1994.
HG/T 2602-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB 2893
GB/T 3766
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 7932-1997
GB/T 8196
GB/T 12783
GB/T 13306
GB/T 13384
HG/T 2108
HG/T 3120
HG/T 3228
JB/T 5923
JB/T 5995
JB/T 8115
JB/T 10205
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2602-1994 (earlier edition)
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 6432-2025 — Oil temperature control system for rubber and plastics machinery
HG/T 6382-2025 — Technical requirements of electron accelerator for tire irradiation processing
HG/T 2603-2011 — Double-sided hose building machines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB 2893Safety colours
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 7932-1997Pneumatic fluid power -- General rules and safety requirements for systems and their components
Similar standards
Editions of HG/T 2602
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2602-2011 | Vertical rubber bale cutters | current edition | Current |
| HG/T 2602-1994 | Vertical rubber bale cutters | previous edition | Superseded |
This page sells the current edition, HG/T 2602-2011. Earlier editions are listed for reference only.
How to Download HG/T 2602-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2602-2011
$85.00