Valid

JB/T 5923-2013Pneumatic fluid power - Technical specifications for cylinders (English PDF)

气动 气缸技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 5923-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 25, 2013

Implementation date

September 1, 2013

Scope

JB/T 5923-2013 is the English-translated version of 气动 气缸技术条件.

JB/T 5923-2013 is a recommended standard of the Chinese machinery industry covering pneumatic fluid power cylinders. It sets the technical requirements for the cylinder system, together with the test methods, the inspection rules and the provisions for labelling, packaging and storage.

The cylinders in its field of use take air as the working medium and are of the double-acting pneumatic drive type, within a defined range of bore sizes. The standard carries Chinese classification J20 and international classification 23.100.20.

It quotes GB/T 2346, GB/T 17446 and JB/T 5967. The edition it supersedes is JB/T 5923-1997.

Found what you need?

Document preview — JB/T 5923-2013

National Standard of the People's Republic of China

ICS
23.100.20
Replacing
JB/T 5923-1997

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 5923-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.

It replaces the earlier edition JB/T 5923-1997.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended standard of the Chinese machinery industry covering pneumatic fluid power cylinders. It sets the technical requirements for the cylinder system, together with the test methods, the inspection rules and the provisions for labelling, packaging and storage. The cylinders in its field of use take air as the working medium and are of the double-acting pneumatic drive type, within a defined range of bore sizes. The standard carries Chinese classification J20 and international classification 23.100.20. It quotes GB/T 2346, GB/T 17446 and JB/T 5967. The edition it supersedes is JB/T 5923-1997.

JB/T 5923-2013 falls under ICS 23.100.20, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 2346

GB/T 17446

JB/T 5967

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 5923-1997 (earlier edition)

Standards on related subjects:

GB/T 7932-2017 — Pneumatic fluid power -- General rules and safety requirements for systems and their components

GB/T 3766-2015 — Hydraulic fluid power -- General rules and safety requirements for systems and their components

JB/T 8727-2004 — Hydraulic hose assemblies

JB/T 7737-2025 — Piston and vane air motors

JB/T 6948-2025 — Reduced air motor

JB/T 7041.1-2023 — Hydraulic Pumps - Part 1: Vane Pumps

6 Classification and status

International classification (ICS): 23.100.20

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 5923

EditionTitleRevisionStatus
JB/T 5923-2013Pneumatic fluid power - Technical specifications for cylinderscurrent editionCurrent
JB/T 5923-1997Pneumatic fluid power - Technical specifications for cylindersprevious editionSuperseded

This page sells the current edition, JB/T 5923-2013. Earlier editions are listed for reference only.

How to Download JB/T 5923-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 5923-2013

$135.00