JB/T 12706.1-2016Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa series - Part 1: Medium series (English PDF)

National Standard of the People's Republic of China

ICS

23.100.20

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

• 1 Scope
• 2 Normative references
• 3 Terms and definitions
• 4 Dimensions
• 5 Bore
• 6 Limit deviations of the piston stroke
• 7 Mounting types
• 8 Characteristics of the piston rod
• 9 Explanation of the markings
• Figure 1 Basic dimensions
• Figure 2 Front rectangular flange type (MF1) and rear rectangular flange type (MF2)
• Figure 3 Front round flange type (MF3) and rear round flange type (MF4)
• Figure 4 Rear fixed single clevis type (MP3), rear detachable single clevis type (MP4), rear fixed single clevis type with spherical bearing (MP5) and rear detachable single clevis type with spherical bearing (MP6)
• Figure 5 Side foot bracket type (MS2)
• Figure 6 Intermediate fixed or adjustable trunnion type (boss) (MT4)
• Table 1 Basic dimensions
• Table 2 Mounting dimensions of the rectangular flange types (MF1 and MF2)
• Table 3 Mounting dimensions of the round flange types (MF3 and MF4)
• Table 4 Mounting dimensions of the rear single clevis types (MP3, MP4, MP5 and MP6)
• Table 5 Mounting dimensions of the side foot bracket type (MS2)
• Table 6 Mounting dimensions of the intermediate fixed or adjustable trunnion type (boss) (MT4)
• Table 7 Dimensions of the ports and of the flanges
• Table 8 Limit deviations of the mounting dimensions determined by the stroke
• Table 9 Limit deviations of the stroke