HG/T 4567-2013Elastic intermediate coatings for buildings (English PDF)
建筑用弹性中涂漆
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4567-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 4567-2013 is the English-translated version of 建筑用弹性中涂漆.
HG/T 4567-2013 is a recommended standard of the Chinese chemical industry covering elastic intermediate coatings used in building painting systems. It classifies these products and lays down their requirements, test methods, inspection rules, marking, packaging and storage.
The coatings it addresses are made from synthetic resin emulsions together with pigments and extender pigments. A wide set of paint and building test standards is cited with it, among them GB/T 528-2009, GB/T 1733-1993, GB/T 9265-2009, GB/T 9271-2008, GB/T 17671 and JC/T 412.1-2006.
The Chinese classification is G51 and the international one 87.040. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 4567-2013
National Standard of the People's Republic of China
- ICS
- 87.040
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4567-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese chemical industry covering elastic intermediate coatings used in building painting systems. It classifies these products and lays down their requirements, test methods, inspection rules, marking, packaging and storage. The coatings it addresses are made from synthetic resin emulsions together with pigments and extender pigments. A wide set of paint and building test standards is cited with it, among them GB/T 528-2009, GB/T 1733-1993, GB/T 9265-2009, GB/T 9271-2008, GB/T 17671 and JC/T 412.1-2006. The Chinese classification is G51 and the international one 87.040.
HG/T 4567-2013 falls under ICS 87.040, in the field of paint and colour industries.
This catalogue holds 140 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 175
GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1733-1993 — Determination of resistance to water of films
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 3186
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 8170
GB/T 9265-2009 — Determination for alkali resistance of film of - Architectural paints and coatings
GB/T 9268-2008 — Determination of freeze-thaw resistance of latex and emulsion paints
GB/T 9271-2008 — Paints and varnishes standard panels for testing
GB/T 9278
GB/T 9750
GB/T 13491
GB/T 17671
JC/T 412.1-2006 — Fiber cement flat sheets. Part 1: Non-Asbestos Fiber cement flat sheets
JG/T 25 -1999 — Determinatin for freeze-thaw resistance of film of building coatings
4 Where this standard sits
It cites 17 standards, among them GB/T 528-2009, GB/T 1728-1979, GB/T 1733-1993, listed in full above.
One other standard in this catalogue cites it: GB/T 25261-2018.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
HG/T 4563-2025 — Non-stick coatings
HG/T 4562-2013 — Irreversible temperature-indicating coatings
HG/T 4561-2013 — Unsaturated polyester putty
7 Classification and status
International classification (ICS): 87.040
Chinese Standard Classification (CCS): G 51
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 175Common portland cement
- GB/T 528-2009Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 1728-1979Determination of drying time of coating and putty films
- GB/T 1733-1993Determination of resistance to water of films
- GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
Similar standards
How to Download HG/T 4567-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4567-2013
$135.00