GB/T 39686-2020Test method for determining elastic modulus and strength of thick ceramic coatings (English PDF)
陶瓷厚涂层的弹性模量与强度试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39686-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39686-2020 is the English-translated version of 陶瓷厚涂层的弹性模量与强度试验方法.
GB/T 39686-2020 is the Chinese standard "Test method for determining elastic modulus and strength of thick ceramic coatings".
Its scope clause reads: This standard specifies the test method for testing the elastic modulus and strength of ceramic thick coatings ( >30µm) by the three-point bending method at room temperature: Language and definitions, principles, equipment, samples, tests, calculations and test reports: This standard applies to the determination of the elastic modulus and strength of ceramic thick coatings on metal or ceramic substrates, and other hard and brittle thick coatings (elastic modulus): Amount greater than 60GPa) can refer to use:. Its clauses include terms and definitions; principle.
Found what you need?
Document preview — GB/T 39686-2020
National Standard of the People's Republic of China
- ICS
- 81.060.30
- Classification
- Q 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
1 Scope
This standard specifies the test method for testing the elastic modulus and strength of ceramic thick coatings ( >30µm) by the three-point bending method at room temperature:
Language and definitions, principles, equipment, samples, tests, calculations and test reports:
This standard applies to the determination of the elastic modulus and strength of ceramic thick coatings on metal or ceramic substrates, and other hard and brittle thick coatings (elastic modulus):
Amount greater than 60GPa) can refer to use:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 16491 Electronic Universal Testing Machine
GB/T 21389 Vernier, belt meter and digital caliper
3 Terms and definitions
The following terms and definitions apply to this document:
3:1
Fracturestrengthofcoating
The average tensile stress of a beam sample containing a single-sided coating when the coating fails under bending load:
3:2
Modulus ratio modulusratio
The ratio of the elastic modulus of the coating to the elastic modulus of the substrate:
3:3
Thickness ratio
The ratio of coating thickness to substrate thickness:
3:4
Deflection ratio deflectionratio
In a three-point bending test with a given load and span, the deflection ratio of the same sample before and after the coating is prepared:
4 Principle
The three-point bending test method was used to measure the same sample under the same conditions before preparing the coating (substrate sample) and after preparing the coating (repeated
The deflection of the combined sample), the ratio of the two deflection reflects the difference in elastic modulus of the sample: The elastic modulus of the coating can be determined by the deflection ratio and the sample
The size is calculated: After obtaining the elastic modulus of the coating, load the coated sample until the coating breaks to obtain its critical load:
The critical load when the layer fractures and the sample size are calculated to obtain the coating fracture strength:
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 39686-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39686-2020
$125.00