HG/T 20720-2020Code for construction and acceptance of waterborne anticorrosive coatings for steel structures of industrial buildings (English PDF)
工业建筑钢结构用水性防腐蚀涂料施工及验收规范
This is a limited preview
Buy now to download the full PDF (33 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20720-2020 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 16, 2020
Implementation date
October 1, 2020
Scope
HG/T 20720-2020 is the English-translated version of 工业建筑钢结构用水性防腐蚀涂料施工及验收规范.
HG/T 20720-2020 is the Chinese standard "Code for construction and acceptance of waterborne anticorrosive coatings for steel structures of industrial buildings".
Its scope clause reads: This standard specifies the terminology, basic regulations, coating quality requirements, coating matching, steel surface treatment before coating, coating and coating quality inspection, environmental protection, safety and engineering acceptance of the application of water-based anti-corrosion coatings for industrial building steel structures request etc. This standard applies to the construction and acceptance of water-based anti-corrosion coatings for industrial building steel structures.
Found what you need?
Document preview — HG/T 20720-2020
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the terminology, basic regulations, coating quality requirements, coating matching, steel surface treatment before coating, coating and coating quality inspection, environmental protection, safety and engineering acceptance of the application of water-based anti-corrosion coatings for industrial building steel structures request etc.
This standard applies to the construction and acceptance of water-based anti-corrosion coatings for industrial building steel structures.
Foreword
This document was issued on 16 April 2020 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 October 2020.
It is the first edition of this standard.
Classification: ICS 71.120.
About this edition
HG/T 20720-2020 is the first edition of this standard. It was issued on 16 April 2020 and has been in force since 1 October 2020.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite HG/T 20720-2020 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG/T 20720-2020 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite HG/T 20720-2020 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG/T 20720-2020 is classified under ICS 71.120, in the field of chemical technology. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is HG/T 20720-2020. A citation should carry the number with its year, because the year identifies the text that applies.
In a catalogue or a filing system it is found under ICS 71.120 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 33 pages — is available in the English PDF.
Similar standards
How to Download HG/T 20720-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 20720-2020
$500.00