HG/T 4846-2015Waterborne inorganic phosphate solvent-resistant anticorrosive coatings (English PDF)
水性无机磷酸盐耐溶剂防腐涂料
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4846-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 14, 2015
Implementation date
January 1, 2016
Scope
HG/T 4846-2015 is the English-translated version of 水性无机磷酸盐耐溶剂防腐涂料.
HG/T 4846-2015 is a recommended Chinese chemical industry standard for waterborne inorganic phosphate solvent-resistant anticorrosive coatings. It gives the requirements for these coatings and the test methods, inspection rules, marking, packaging and storage that accompany them.
The coatings in scope use water as the dispersion medium and are made from inorganic phosphate, ultrafine zinc powder, fillers and crosslinking agents. They are intended mainly for solvent tanks, the inner walls of holds and the surfaces of steel products, and may also be used as high temperature coatings.
The standard quotes a long list of paint test documents, among them GB/T 1725, GB/T 1735, GB/T 1766, GB/T 5210, GB/T 9274, HG/T 3668 and ASTM D6580. Issued on 14 July 2015, it has applied since 1 January 2016.
Found what you need?
Document preview — HG/T 4846-2015
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4846-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese chemical industry standard for waterborne inorganic phosphate solvent-resistant anticorrosive coatings. It gives the requirements for these coatings and the test methods, inspection rules, marking, packaging and storage that accompany them. The coatings in scope use water as the dispersion medium and are made from inorganic phosphate, ultrafine zinc powder, fillers and crosslinking agents. They are intended mainly for solvent tanks, the inner walls of holds and the surfaces of steel products, and may also be used as high temperature coatings. The standard quotes a long list of paint test documents, among them GB/T 1725, GB/T 1735, GB/T 1766, GB/T 5210, GB/T 9274, HG/T 3668 and ASTM D6580.
HG/T 4846-2015 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content
GB/T 1728-1979 — Methods of test for drying time of coatings of paints and putties
GB/T 1735-2009 — Paints and varnishes -- Determination of heat resistance
GB/T 1766-2008 — Paints and Varnishes – Rating Schemes of Degradation of Coats
GB/T 1771-2007 — Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)
GB/T 3186
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
GB/T 8170
GB/T 8923.1-2011 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
GB/T 9271-2008 — Paints and varnishes standard panels for testing
GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids
GB/T 9278
GB/T 9750
GB/T 13288.1-2008 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness
GB/T 13491
HG/T 3668-2009 — Zinc-rich primers
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
HG/T 4845-2015 — Cold-applied zinc coatings
HG/T 4844-2015 — Low zinc primers
HG/T 4842-2015 — Elastic emulsions for architectural coatings
6 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1725-2007Paints, varnishes and plastics -- Determination of non-volatile-matter content
- GB/T 1728-1979Determination of drying time of coating and putty films
- GB/T 1735-2009Paints and varnishes — Determination of heat resistance
- GB/T 1766-2008Paints and Varnishes – Rating Schemes of Degradation of Coats
- GB/T 1771-2007Paints and Varnishes -- Determination of resistance to neutral salt spray (fog)
- GB/T 3186Paints, varnishes and raw materials for paints and varnishes -- Sampling
Similar standards
How to Download HG/T 4846-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13288.1-2008 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
GB/T 13452.2-2008 — Paints and varnishes -- Determination of film thickness
GB/T 13491-1992 — General rule for packing of coatings
HG/T 4846-2015
$105.00