Valid

HG/T 4842-2015Elastic emulsions for architectural coatings (English PDF)

建筑涂料用弹性乳液

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4842-2015 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 14, 2015

Implementation date

January 1, 2016

Scope

HG/T 4842-2015 is the English-translated version of 建筑涂料用弹性乳液.

HG/T 4842-2015 is a recommended chemical industry standard of China dealing with elastic emulsions for architectural coatings. It classifies the several types of elastic synthetic resin emulsion and lays down their requirements, test methods and inspection rules, along with marking, packaging and storage.

The emulsions it covers are obtained by emulsion polymerization in water of monomers such as (meth)acrylic acid and its esters, styrene and vinyl acetate, and they act as the film-forming binder of elastic building coatings.

Elastic latexes for other kinds of architectural coating, and for other waterborne coatings, may be assessed by reference to it. Among the documents called up are GB/T 528, GB/T 2794, GB/T 9268, GB 18582 and GB/T 23993. Issued on 14 July 2015, it has applied since 1 January 2016.

Found what you need?

Document preview — HG/T 4842-2015

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4842-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 July 2015.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard is a recommended chemical industry standard of China dealing with elastic emulsions for architectural coatings. It classifies the several types of elastic synthetic resin emulsion and lays down their requirements, test methods and inspection rules, along with marking, packaging and storage. The emulsions it covers are obtained by emulsion polymerization in water of monomers such as (meth)acrylic acid and its esters, styrene and vinyl acetate, and they act as the film-forming binder of elastic building coatings. Elastic latexes for other kinds of architectural coating, and for other waterborne coatings, may be assessed by reference to it. Among the documents called up are GB/T 528, GB/T 2794, GB/T 9268, GB 18582 and GB/T 23993.

HG/T 4842-2015 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 528-2009 — Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

GB/T 1725-2007 — Paints, varnishes and plastics -- Determination of non-volatile-matter content

GB/T 2794-2013 — Determination for viscosity of adhesives - Single cylinder rotational viscometer method

GB/T 3186

GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods

GB/T 8170

GB/T 9268-2008 — Determination of freeze-thaw resistance of latex and emulsion paints

GB/T 9278

GB/T 9750

GB/T 13491-1992 — General rule for packing of coatings

GB 18582-2008 — Indoor decorating and refurbishing materials - Limit of harmful substances of interior architectural coatings

GB/T 20623-2006 — Emulsions for architectural coatings

GB/T 23993-2009 — Determination of formaldehyde content of waterborne coatings - Spectrophtometric method with acetylacetone

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 5060-2016 — Anticorrosive coatings for liquefied natural gas (LNG) storage tanks

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion

HG/T 4846-2015 — Waterborne inorganic phosphate solvent-resistant anticorrosive coatings

HG/T 4845-2015 — Cold-applied zinc coatings

HG/T 4844-2015 — Low zinc primers

6 Classification and status

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4842-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4842-2015

$125.00