HG/T 3661.2-2016Industrial fuel gases - Propane for cutting and welding (English PDF)
工业燃气 切割焊接用丙烷
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3661.2-2016 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 5, 2016
Implementation date
September 1, 2016
Scope
HG/T 3661.2-2016 is the English-translated version of 工业燃气 切割焊接用丙烷.
HG/T 3661.2-2016 is part 2 of the recommended chemical industry standard on industrial fuel gases, and it deals with propane for cutting and welding. It sets the technical requirements and the inspection rules, the test methods and the provisions for packaging, marking and storage.
The propane it covers is the gas obtained from oil and gas extraction and from petroleum processing, used for flame cutting and welding and for making up the mixed gases employed in that work.
Under classification G86 and ICS 71.100.20, it quotes GB 190, GB 5100, GB 7144, GB 9448, GB 13075, JB/T 5905, SH/T 0221 and SH/T 0230 among others. It replaces HG/T 3661.2-1999. Issued on 5 April 2016, it has applied since 1 September 2016.
Found what you need?
Document preview — HG/T 3661.2-2016
National Standard of the People's Republic of China
- ICS
- 71.100.20
- Replacing
- HG/T 3661.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3661.2-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 April 2016 and has been in force since 1 September 2016.
It replaces the earlier edition HG/T 3661.2-1999.
It is one of 3 parts of the HG/T 3661 series.
2 Scope Preview
This standard is part 2 of the recommended chemical industry standard on industrial fuel gases, and it deals with propane for cutting and welding. It sets the technical requirements and the inspection rules, the test methods and the provisions for packaging, marking and storage. The propane it covers is the gas obtained from oil and gas extraction and from petroleum processing, used for flame cutting and welding and for making up the mixed gases employed in that work. Under classification G86 and ICS 71.100.20, it quotes GB 190, GB 5100, GB 7144, GB 9448, GB 13075, JB/T 5905, SH/T 0221 and SH/T 0230 among others. It replaces HG/T 3661.2-1999.
HG/T 3661.2-2016 falls under ICS 71.100.20, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 190
GB/T 3723
GB 5100
GB 7144
GB 9448
GB/T 10478
GB 13075
GB 14193
JB/T 5905
JB/T 6898
SH/T 0221
SH/T 0222
SH/T 0230
SH/T 0232
SH/T 0233
4 Where this standard sits
It cites 15 standards, listed in full above.
It is one part of the HG/T 3661 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 3661.1-1999 — Burning gases for welding and cutting. Propene
HG/T 3661.1-2016 — Industrial fuel gases - Propylene for cutting and welding
Other editions:
HG/T 3661.2-1999 (earlier edition)
Standards on related subjects:
GB/T 3634.1-2025 — Hydrogen - Part 1: Industrial hydrogen
GB/T 3634.2-2025 — Hydrogen - Part 2: Pure hydrogen, high purity hydrogen and ultra purity hydrogen
GB/T 4842-2006 — Argon
HG/T 4984-2016 — Mixed gases for welding - Carbon dioxide-oxygen/argon
HG/T 4983-2016 — Industrial fuel gas - Propane/natural gas mixture
7 Classification and status
International classification (ICS): 71.100.20
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 190Packing symbol of dangerous goods
- GB/T 3723Sampling of chemical products for industrial use. Safety in sampling
- GB 5100Welded steel gas cylinders
- GB 7144Coloured cylinder mark for gases
- GB 9448Safety in welding and cutting
- GB/T 10478Railway tank car for liquefied gases
SH/T 0230 · SH/T 0233
Similar standards
Editions of HG/T 3661.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3661.2-2016 | Industrial fuel gases - Propane for cutting and welding | current edition | Current |
| HG/T 3661.2-1999 | Industrial fuel gases - Propane for cutting and welding | previous edition | Superseded |
This page sells the current edition, HG/T 3661.2-2016. Earlier editions are listed for reference only.
How to Download HG/T 3661.2-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 13075-1991 — Periodic inspection and evaluation of welded steel gas cylinders
GB 13075-1999 — Periodic inspection and evaluation of welded steel gas cylinders
GB 14193-1993 — Rules for filling of liquefied gas cylinders
HG/T 3661.2-2016
$125.00