Valid

HG/T 3661.1-2016Industrial fuel gases - Propylene for cutting and welding (English PDF)

工业燃气 切割焊接用丙烯

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3661.1-2016 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 5, 2016

Implementation date

September 1, 2016

Scope

HG/T 3661.1-2016 is the English-translated version of 工业燃气 切割焊接用丙烯.

Part 1 of the industrial fuel gases standard, HG/T 3661.1-2016, is the recommended chemical industry standard for propylene for cutting and welding. It states the technical requirements, the inspection rules, the test methods and the rules on packaging, marking and storage for that gas.

The propylene concerned is the material obtained during petroleum processing, used for flame cutting and welding and for preparing the mixed gases employed in it.

Its classification is G86 with ICS 71.100.20, and it is read with the companion part HG/T 3661.2 and quotes GB/T 11141, GB/T 13290, SH/T 0221, SH/T 0230 and SH/T 0232.

It takes the place of HG/T 3661.1-1999. Issued on 5 April 2016, it has applied since 1 September 2016.

Found what you need?

Document preview — HG/T 3661.1-2016

National Standard of the People's Republic of China

ICS
71.100.20
Replacing
HG/T 3661.1-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3661.1-2016 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 April 2016 and has been in force since 1 September 2016.

It replaces the earlier edition HG/T 3661.1-1999.

It is one of 3 parts of the HG/T 3661 series.

2 Scope Preview

Part 1 of the industrial fuel gases standard, HG/T 3661.1-2016, is the recommended chemical industry standard for propylene for cutting and welding. It states the technical requirements, the inspection rules, the test methods and the rules on packaging, marking and storage for that gas. The propylene concerned is the material obtained during petroleum processing, used for flame cutting and welding and for preparing the mixed gases employed in it. Its classification is G86 with ICS 71.100.20, and it is read with the companion part HG/T 3661.2 and quotes GB/T 11141, GB/T 13290, SH/T 0221, SH/T 0230 and SH/T 0232. It takes the place of HG/T 3661.1-1999.

HG/T 3661.1-2016 falls under ICS 71.100.20, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 11141

GB/T 13290

HG/T 3661.2

SH/T 0221

SH/T 0230

SH/T 0232

4 Where this standard sits

It cites 6 standards, listed in full above.

It is one part of the HG/T 3661 series, of which this catalogue holds 3 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

HG/T 3661.2-1999 — Burning gases for welding and cutting. Propane

HG/T 3661.2-2016 — Industrial fuel gases - Propane for cutting and welding

Other editions:

HG/T 3661.1-1999 (earlier edition)

Standards on related subjects:

GB/T 3634.1-2025 — Hydrogen - Part 1: Industrial hydrogen

GB/T 3634.2-2025 — Hydrogen - Part 2: Pure hydrogen, high purity hydrogen and ultra purity hydrogen

GB/T 4842-2006 — Argon

HG/T 4984-2016 — Mixed gases for welding - Carbon dioxide-oxygen/argon

HG/T 4983-2016 — Industrial fuel gas - Propane/natural gas mixture

7 Classification and status

International classification (ICS): 71.100.20

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3661.1

EditionTitleRevisionStatus
HG/T 3661.1-2016Industrial fuel gases - Propylene for cutting and weldingcurrent editionCurrent
HG/T 3661.1-1999Industrial fuel gases - Propylene for cutting and weldingprevious editionSuperseded

This page sells the current edition, HG/T 3661.1-2016. Earlier editions are listed for reference only.

How to Download HG/T 3661.1-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3661.1-2016

$105.00