HG/T 3533-2011Industrial circulating cooling water - Determination of loss on ignition of sludge and corrosion products (English PDF)
工业循环冷却水污垢和腐蚀产物中灼烧失重测定方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3533-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 3533-2011 is the English-translated version of 工业循环冷却水污垢和腐蚀产物中灼烧失重测定方法.
HG/T 3533-2011 is a recommended chemical industry standard of China on the loss on ignition of sludge and corrosion products from industrial circulating cooling water.
Two determinations are described: the loss on ignition at 550 °C and the further loss between 550 °C and 950 °C. The first gives an estimate of the organic matter combined in the deposit, the second an estimate of its carbonate content.
It quotes HG/T 3530 and HG/T 3531. It replaces HG/T 3533-2003. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 3533-2011
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Replacing
- HG/T 3533-2003
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3533-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 3533-2003, HG/T 3533-1985.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended chemical industry standard of China on the loss on ignition of sludge and corrosion products from industrial circulating cooling water. Two determinations are described: the loss on ignition at 550 °C and the further loss between 550 °C and 950 °C. The first gives an estimate of the organic matter combined in the deposit, the second an estimate of its carbonate content. It quotes HG/T 3530 and HG/T 3531. It replaces HG/T 3533-2003.
HG/T 3533-2011 falls under ICS 71.040.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
HG/T 3530
HG/T 3531
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3533-2003 (earlier edition)
HG/T 3533-1985 (earlier edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method
HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples
HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method
6 Classification and status
International classification (ICS): 71.040.40
Chinese Standard Classification (CCS): G 76
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3533
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3533-2011 | Industrial circulating cooling water - Determination of loss on ignition of sludge and corrosion products | current edition | Current |
| HG/T 3533-2003 | Industrial circulating cooling water - Determination of loss on ignition of sludge and corrosion products | previous edition | Superseded |
This page sells the current edition, HG/T 3533-2011. Earlier editions are listed for reference only.
How to Download HG/T 3533-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 3530-1985 — Investigation, sampling and preparation of specimens for fouling and corrosion products of industrial circulating cooling water
HG/T 3530-2003 — Industrial circulating cooling water - Survey, sampling and preparation of fouling and corrosion product samples
HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples
HG/T 3533-2011
$115.00