HG/T 3530-2012Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples (English PDF)
工业循环冷却水污垢和腐蚀产物试样的采取和制备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3530-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 3530-2012 is the English-translated version of 工业循环冷却水污垢和腐蚀产物试样的采取和制备.
HG/T 3530-2012 is the recommended Chinese chemical industry standard that sets out how samples of sludge and corrosion products are taken from industrial circulating cooling water and how those samples are then prepared.
It is written for the sampling carried out when a works opens its circulating cooling water system for overhaul. The preparation stage turns the material collected into a sample fit for the analytical methods of the series.
GB/T 603 and GB/T 6682 are the two standards it quotes. It replaces HG/T 3530-2003. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 3530-2012
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Replacing
- HG/T 3530-2003
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3530-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
It replaces the earlier edition HG/T 3530-2003, HG/T 3530-1985.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard that sets out how samples of sludge and corrosion products are taken from industrial circulating cooling water and how those samples are then prepared. It is written for the sampling carried out when a works opens its circulating cooling water system for overhaul. The preparation stage turns the material collected into a sample fit for the analytical methods of the series. GB/T 603 and GB/T 6682 are the two standards it quotes. It replaces HG/T 3530-2003.
HG/T 3530-2012 falls under ICS 71.040.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 603
GB/T 6682
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3530-2003 (earlier edition)
HG/T 3530-1985 (earlier edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 3520-2015 — Industrial circulating cooling water - Determination of calcium ion in phosphate-zinc prefilming solution
HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method
HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method
6 Classification and status
International classification (ICS): 71.040.40
Chinese Standard Classification (CCS): G 76
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Cited by
- GB/T 14636-2021Determination of calcium and magnesium in industrial circulating cooling water and scale - Atomic absorption spectrometric method
- GB/T 14637-2021Determination of copper,iron and zinc in industrial circulating cooling water and scale - Atomic absorption spectrometric method
- HG/T 4322-2012Industrial circulating cooling water - Determination of silicate in fouling and corrosion products
- HG/T 3531-2011Industrial circulating cooling water - Determination of water content in sludge and corrosion products
- HG/T 3532-2011Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products
- HG/T 3533-2011Industrial circulating cooling water - Determination of loss on ignition of sludge and corrosion products
Similar standards
Editions of HG/T 3530
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3530-2012 | Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples | current edition | Current |
| HG/T 3530-2003 | Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples | previous edition | Superseded |
This page sells the current edition, HG/T 3530-2012. Earlier editions are listed for reference only.
How to Download HG/T 3530-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 603-1988 — Chemical reagent--Preparations of reagent solutions for use in test methods
GB/T 603-2002 — Chemical reagent - Preparations of reagent solutions for use in test methods
GB/T 603-2023 — Chemical reagent - Preparations of reagent solutions for use in test methods
HG/T 3530-2012
$115.00