Valid

HG/T 3535-2011Industrial circulating cooling water - Determination of sulfate in sludge and corrosion products (English PDF)

工业循环冷却水污垢和腐蚀产物中硫酸盐含量测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3535-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 3535-2011 is the English-translated version of 工业循环冷却水污垢和腐蚀产物中硫酸盐含量测定方法.

Sludge and corrosion products taken from industrial circulating cooling water systems are analysed for sulphate under HG/T 3535-2011, a recommended standard of the Chinese chemical industry.

The standard prescribes a gravimetric method for that determination. It applies to the deposits and corrosion products collected from industrial circulating cooling water systems.

Reagents and water follow GB/T 603 and GB/T 6682, while HG/T 3530 and HG/T 3531 are quoted. The document supersedes HG/T 3535-2003 and carries the Chinese classification G76. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 3535-2011

National Standard of the People's Republic of China

ICS
71.040.40
Replacing
HG/T 3535-2003

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3535-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 3535-2003, HG/T 3535-1985.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Sludge and corrosion products taken from industrial circulating cooling water systems are analysed for sulphate under HG/T 3535-2011, a recommended standard of the Chinese chemical industry. The standard prescribes a gravimetric method for that determination. It applies to the deposits and corrosion products collected from industrial circulating cooling water systems. Reagents and water follow GB/T 603 and GB/T 6682, while HG/T 3530 and HG/T 3531 are quoted. The document supersedes HG/T 3535-2003 and carries the Chinese classification G76.

HG/T 3535-2011 falls under ICS 71.040.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 603

GB/T 6682

HG/T 3530

HG/T 3531

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3535-2003 (earlier edition)

HG/T 3535-1985 (earlier edition)

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method

HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples

HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method

6 Classification and status

International classification (ICS): 71.040.40

Chinese Standard Classification (CCS): G 76

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3535

EditionTitleRevisionStatus
HG/T 3535-2011Industrial circulating cooling water - Determination of sulfate in sludge and corrosion productscurrent editionCurrent
HG/T 3535-2003Industrial circulating cooling water - Determination of sulfate in sludge and corrosion productsprevious editionSuperseded

This page sells the current edition, HG/T 3535-2011. Earlier editions are listed for reference only.

How to Download HG/T 3535-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3535-2011

$115.00