Valid

HG/T 3536-2011Industrial circulating cooling water - Determination of carbon dioxide in sludge and corrosion products (English PDF)

工业循环冷却水污垢和腐蚀产物中二氧化碳含量的测定方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3536-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 3536-2011 is the English-translated version of 工业循环冷却水污垢和腐蚀产物中二氧化碳含量的测定方法.

HG/T 3536-2011 is the Chinese chemical industry standard that sets out how carbon dioxide is determined in the sludge and corrosion products of circulating cooling water systems.

The deposits concerned are those whose main constituent is carbonate, and the carbon dioxide content is worked out from the carbonate found in the sample, over a measuring range of 0.1% to 40%.

It applies to deposits and corrosion products taken from circulating cooling water systems. It quotes GB/T 602-2002, GB/T 603 and GB/T 6682, HG/T 3530 and HG/T 3531.

The standard replaces HG/T 3536-2003. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 3536-2011

National Standard of the People's Republic of China

ICS
71.040.40
Replacing
HG/T 3536-2003

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3536-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 3536-2003, HG/T 3536-1985.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard that sets out how carbon dioxide is determined in the sludge and corrosion products of circulating cooling water systems. The deposits concerned are those whose main constituent is carbonate, and the carbon dioxide content is worked out from the carbonate found in the sample, over a measuring range of 0.1% to 40%. It applies to deposits and corrosion products taken from circulating cooling water systems. It quotes GB/T 602-2002, GB/T 603 and GB/T 6682, HG/T 3530 and HG/T 3531. The standard replaces HG/T 3536-2003.

HG/T 3536-2011 falls under ICS 71.040.40, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 602-2002 — Chemical reagent - Preparations of standard solutions for impurity

GB/T 603

GB/T 6682

HG/T 3530

HG/T 3531

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3536-2003 (earlier edition)

HG/T 3536-1985 (earlier edition)

Standards on related subjects:

GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water

GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule

GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness

HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method

HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples

HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method

6 Classification and status

International classification (ICS): 71.040.40

Chinese Standard Classification (CCS): G 76

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3536

EditionTitleRevisionStatus
HG/T 3536-2011Industrial circulating cooling water - Determination of carbon dioxide in sludge and corrosion productscurrent editionCurrent
HG/T 3536-2003Industrial circulating cooling water - Determination of carbon dioxide in sludge and corrosion productsprevious editionSuperseded

This page sells the current edition, HG/T 3536-2011. Earlier editions are listed for reference only.

How to Download HG/T 3536-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3536-2011

$145.00