HG/T 3532-2011Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products (English PDF)
工业循环冷却水污垢和腐蚀产物中硫化亚铁含量的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3532-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 3, 2011
Implementation date
July 1, 2012
Scope
HG/T 3532-2011 is the English-translated version of 工业循环冷却水污垢和腐蚀产物中硫化亚铁含量的测定.
HG/T 3532-2011 is the recommended Chinese chemical industry standard covering the determination of ferrous sulfide in the sludge and corrosion products of industrial circulating cooling water.
It applies to the ferrous sulfide content of deposits taken from circulating cooling water systems, a figure that reflects how far the steel surfaces of the system have been attacked by anaerobic sulfate-reducing bacteria.
GB/T 601, GB/T 603 and GB/T 6682 are cited, along with HG/T 3530 and HG/T 3531. It supersedes HG/T 3532-2003. Issued on 3 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 3532-2011
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Replacing
- HG/T 3532-2003
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3532-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 3 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 3532-2003, HG/T 3532-1985.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard covering the determination of ferrous sulfide in the sludge and corrosion products of industrial circulating cooling water. It applies to the ferrous sulfide content of deposits taken from circulating cooling water systems, a figure that reflects how far the steel surfaces of the system have been attacked by anaerobic sulfate-reducing bacteria. GB/T 601, GB/T 603 and GB/T 6682 are cited, along with HG/T 3530 and HG/T 3531. It supersedes HG/T 3532-2003.
HG/T 3532-2011 falls under ICS 71.040.40, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 601
GB/T 603
GB/T 6682
HG/T 3530
HG/T 3531
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3532-2003 (earlier edition)
HG/T 3532-1985 (earlier edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method
HG/T 3530-2012 — Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples
HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method
6 Classification and status
International classification (ICS): 71.040.40
Chinese Standard Classification (CCS): G 76
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 601Chemical Reagent - Preparations of Standard Volumetric Solutions
- GB/T 603Chemical reagent - Preparations of reagent solutions for use in test methods
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- HG/T 3530Industrial circulating cooling water - Sampling and preparation of sludge and corrosion product samples
- HG/T 3531Industrial circulating cooling water - Determination of water content in sludge and corrosion products
Similar standards
Editions of HG/T 3532
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3532-2011 | Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products | current edition | Current |
| HG/T 3532-2003 | Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products | previous edition | Superseded |
This page sells the current edition, HG/T 3532-2011. Earlier editions are listed for reference only.
How to Download HG/T 3532-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 601-1988 — Chemical reagent--Preparations of standard volumetric solutions
GB/T 601-2002 — Chemical reagent - Preparations of standard volumetric solutions
GB/T 601-2016 — Chemical Reagent - Preparations of Standard Volumetric Solutions
HG/T 3532-2011
$145.00