HG/T 3530-2003Industrial circulating cooling water - Survey, sampling and preparation of fouling and corrosion product samples (English PDF)
工业循环冷却水污垢和腐蚀产物试样的调查、采取和制备
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3530-2003 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 9, 2004
Implementation date
May 1, 2004
Scope
HG/T 3530-2003 is the English-translated version of 工业循环冷却水污垢和腐蚀产物试样的调查、采取和制备.
HG/T 3530-2003 is the Chinese chemical industry standard covering industrial circulating cooling water - Survey, sampling and preparation of fouling and corrosion product samples.
It was issued on 9 January 2004 and has been in force since 1 May 2004, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2003 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG/T 3530-2003
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 3530-2003 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 9 January 2004 and has been in force since 1 May 2004.
It replaces the earlier edition HG/T 3530-1985.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
HG/T 3530-2003 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other editions:
HG/T 3530-2012 (later edition)
HG/T 3530-1985 (earlier edition)
Standards on related subjects:
GB/T 6907-2022 — Analysis of water used in boiler and cooling system—Sampling method of water
GB/T 6903-2022 — Analysis of water used in boiler and cooling system—General rule
GB/T 6909-2018 — Analysis of water used in boiler and cooling system—Determination of hardness
HG/T 3520-2015 — Industrial circulating cooling water - Determination of calcium ion in phosphate-zinc prefilming solution
HG/T 3539-2012 — Industrial circulating cooling water - Determination of iron content - 1,10-Phenanthroline spectrophotometric method
HG/T 3526-2011 — Industrial circulating cooling water - Determination of nitrate - Sulfosalicylic acid spectrophotometric method
5 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 14636-2021Determination of calcium and magnesium in industrial circulating cooling water and scale - Atomic absorption spectrometric method
- GB/T 14637-2021Determination of copper,iron and zinc in industrial circulating cooling water and scale - Atomic absorption spectrometric method
- HG/T 4322-2012Industrial circulating cooling water - Determination of silicate in fouling and corrosion products
- HG/T 3531-2011Industrial circulating cooling water - Determination of water content in sludge and corrosion products
- HG/T 3532-2011Industrial circulating cooling water - Determination of ferrous sulfide in sludge and corrosion products
- HG/T 3533-2011Industrial circulating cooling water - Determination of loss on ignition of sludge and corrosion products
Similar standards
How to Download HG/T 3530-2003
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 3530-2003
$55.00