HG/T 20661-2011Technical specification for lining construction of fluidized bed roasters for sulfuric acid (English PDF)
硫酸沸腾炉砌筑技术条件
This is a limited preview
Buy now to download the full PDF (25 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20661-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
June 1, 2011
Scope
HG/T 20661-2011 is the English-translated version of 硫酸沸腾炉砌筑技术条件.
HG/T 20661-2011 is the Chinese chemical industry specification for laying the lining of fluidized bed roasting furnaces in sulphuric acid plants. It governs the masonry construction of these furnaces and its acceptance.
The furnaces in its scope are those producing SO2 feed gas from pyrite and from prepared sulphur concentrate, and the masonry construction of sulphur-burning furnaces may also be carried out by reference to it.
Refractory, brick and surface preparation references are quoted throughout, among them GB 201, GB/T 2988, GB/T 3994, GB/T 3996, GB/T 8923, GB 50211, GB 50309, HG/T 3252, HG/T 20685, JB/T 4735 and several YB/T documents.
It replaces HG/T 20661-1999. Issued on 18 May 2011, it has applied since 1 June 2011.
Found what you need?
Document preview — HG/T 20661-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 20661-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 20661-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 June 2011.
It replaces the earlier edition HG/T 20661-1999.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry specification for laying the lining of fluidized bed roasting furnaces in sulphuric acid plants. It governs the masonry construction of these furnaces and its acceptance. The furnaces in its scope are those producing SO2 feed gas from pyrite and from prepared sulphur concentrate, and the masonry construction of sulphur-burning furnaces may also be carried out by reference to it. Refractory, brick and surface preparation references are quoted throughout, among them GB 201, GB/T 2988, GB/T 3994, GB/T 3996, GB/T 8923, GB 50211, GB 50309, HG/T 3252, HG/T 20685, JB/T 4735 and several YB/T documents. It replaces HG/T 20661-1999.
HG/T 20661-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 201
GB/T 2091
GB/T 2480
GB/T 2988
GB/T 2994
GB/T 3003
GB/T 3518
GB/T 3994
GB/T 3996
GB/T 4209
GB/T 8923
GB/T 10325
GB/T 14982
GB 50211
GB 50309
HG/T 3252
HG/T 20685
JB/T 4735
YB/T 5083
YB/T 5106
YB/T 5179
YB/T 5207
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 25 pages
5 Related standards
Other editions:
HG/T 20661-1999 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises
HG/T 20580-2020 — Code for basic design of steel chemical vessels
HG/T 20660-2017 — Classification of toxicity hazard and explosion hazard of chemical media in pressure vessels
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 20661
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20661-2011 | Technical specification for lining construction of fluidized bed roasters for sulfuric acid | current edition | Current |
| HG/T 20661-1999 | Technical specification for lining construction of fluidized bed roasters for sulfuric acid | previous edition | Superseded |
This page sells the current edition, HG/T 20661-2011. Earlier editions are listed for reference only.
How to Download HG/T 20661-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 20661-2011
$445.00