HG/T 2472-2007Technical specifications for PVC fluidized bed dryers (English PDF)
聚氯乙烯沸腾床干燥器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2472-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 22, 2007
Implementation date
April 1, 2008
Scope
HG/T 2472-2007 is the English-translated version of 聚氯乙烯沸腾床干燥器技术条件.
HG/T 2472-2007 is the recommended Chinese chemical industry standard that sets the technical requirements for PVC fluidized bed dryers, covering their design, manufacture, inspection, installation, testing and acceptance.
It is written for the heat-type fluidized bed dryer used on poly(vinyl chloride). The wet PVC it handles carries a moisture content of 23 % to 27 % on a wet-mass basis and a particle size of 30 µm to 350 µm, and dryers above the capacity limit the standard sets may still use it as a reference.
GB/T 700, GB/T 983, GB/T 1804, GB/T 3280, GB/T 3281, GB/T 4226, GB/T 13296, GB/T 13306, JB 4708, JB/T 4730 and YB/T 5091 are quoted. It replaces HG/T 2472-1993. Issued on 22 September 2007, it has applied since 1 April 2008.
Found what you need?
Document preview — HG/T 2472-2007
National Standard of the People's Republic of China
- ICS
- 71.120.99
- Replacing
- HG/T 2472-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2472-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 September 2007 and has been in force since 1 April 2008.
It replaces the earlier edition HG/T 2472-1993.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard that sets the technical requirements for PVC fluidized bed dryers, covering their design, manufacture, inspection, installation, testing and acceptance. It is written for the heat-type fluidized bed dryer used on poly(vinyl chloride). The wet PVC it handles carries a moisture content of 23 % to 27 % on a wet-mass basis and a particle size of 30 µm to 350 µm, and dryers above the capacity limit the standard sets may still use it as a reference. GB/T 700, GB/T 983, GB/T 1804, GB/T 3280, GB/T 3281, GB/T 4226, GB/T 13296, GB/T 13306, JB 4708, JB/T 4730 and YB/T 5091 are quoted. It replaces HG/T 2472-1993.
HG/T 2472-2007 falls under ICS 71.120.99, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 700
GB/T 983
GB/T 1804
GB/T 3280
GB/T 3281
GB/T 4226
GB/T 13296
GB/T 13306
JB 4708
JB/T 4730
YB/T 5091
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2472-1993 (earlier edition)
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 5998-2024 — Volatile organic compound cyclone adsorption-catalytic combustion device
HG/T 2474-2014 — Spiral conical mixers
HG/T 2473-2011 — High-speed dispersers
6 Classification and status
International classification (ICS): 71.120.99
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 700Carbon structural steels
- GB/T 983Covered electrodes for manual metal arc welding of stainless and heat-resisting steels
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3280Cold rolled stainless steel plate, sheet and strip
- GB/T 4226Cold finished stainless steel bar
- GB/T 13296Seamless stainless steel tubes for boilers and heat exchangers
GB/T 3281 · JB/T 4730
Similar standards
Editions of HG/T 2472
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2472-2007 | Technical specifications for PVC fluidized bed dryers | current edition | Current |
| HG/T 2472-1993 | Technical specifications for PVC fluidized bed dryers | previous edition | Superseded |
This page sells the current edition, HG/T 2472-2007. Earlier editions are listed for reference only.
How to Download HG/T 2472-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13296-2013 — Seamless stainless steel tubes for boiler and heat exchanger
GB/T 13296-2023 — Seamless stainless steel tubes for boilers and heat exchangers
GB/T 13306-1991 — Plates
HG/T 2472-2007
$115.00