Valid

GB/T 6769-2016Regulations governing the layout of driver's cabs of locomotives (English PDF)

机车司机室布置规则

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 6769-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 13, 2016

Implementation date

July 1, 2017

Scope

GB/T 6769-2016 is the English-translated version of 机车司机室布置规则.

GB/T 6769-2016 is the Chinese standard "Regulations governing the layout of driver's cabs of locomotives". Its scope clause reads: This standard specifies the layout rules for locomotive cabs.

This standard applies to the newly built electric locomotive and diesel locomotive cab layout. Other locomotives can refer to the implementation. Its clauses include normative reference documents; cab layout.

Found what you need?

Document preview — GB/T 6769-2016

National Standard of the People's Republic of China

ICS: 29.280
Classification: S 41
Replacing: GB/T 6769-2000

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 normative reference document
3 cab layout
4 door
5 console
6 seats
7 Handling and control equipment
8 driver room window
9 Illumination and Illumination Condition
10 floor
12 on the pedal
13 handrails and door handles
14 fire
15 Lookout Condition
Appendix A (normative appendix) Body measurement dimensions
Appendix B (Normative Appendix) Operator Station Dimensions
Appendix C (informative) Best suited hand reachability radius
Appendix D (normative appendix) on the pedal, handrails and door handles

1 Scope

This standard specifies the layout rules for locomotive cabs.

This standard applies to the newly built electric locomotive and diesel locomotive cab layout.

Other locomotives can refer to the implementation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB 146.1 Standard Gauge Rail Locomotive Vehicle Boundary

GB/T 3450 Railway locomotive and motor vehicle crew room noise limits and measurement methods

Locomotive cabs - Part 1. Desired conditions

GB 5914.2 Locomotive cabs Front windows, side windows and other windows

Special safety rules for locomotive cab

Code for fire protection and fire protection of electric locomotives GB 6771

TB/T 1451 locomotive, moving car front window glass

3 cab layout

3.1 Basic requirements

All the operating parts of the cab should be arranged for single-driver operation and driver stand-up operation.

3.2 General size requirements

3.2.1

The cab should have sufficient space so that the driver is close to every part of the driver's room and the height of the cab floor from the ceiling should not

Less than.2000mm. When the driver is sitting, the height is measured along the driver's eye, from the inside of the front window to the rear of the driver's seat.

Walls, doors, cabinets, etc.) the minimum distance of 1500mm.

3.2.2

from the driver's eyes to the front window of the distance should be 500mm ~ 1200mm (see Figure 1).

3.2.3

The width of the cab shall be such as to allow the officers and passengers to observe the trains traveling on both sides by means of side windows or by using a mirror without having to explore the vehicle.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 28427-2026|GB/T 32580.5-2026|GB/T 10411-2025|GB/T 25020.1-2025|GB/T 28429-2025|GB/T 32358-2025

Editions of GB/T 6769

Edition	Title	Revision	Status
GB/T 6769-2016	Regulations governing the layout of driver's cabs of locomotives	current edition	Current
GB/T 6769-2000	Regulations governing the layout of driver's cabs of locomotives	previous edition	Superseded

This page sells the current edition, GB/T 6769-2016. Earlier editions are listed for reference only.

How to Download GB/T 6769-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.