GB/T 4219.1-2008Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes (English PDF)

1 Scope

GB/T 4219 provisions of this part of the polyvinyl chloride (PVC) resin as the main raw material, extrusion industry with a hard PVC (PVC-U) pressure pipes (hereinafter referred to as "pipe") material, product classifications, requirements, test methods, inspection rules and signs, packaging, transportation,

Storage.

This section applies to rigid PVC piping systems for industrial use, but also for transporting pressurized water supply and drainage and sewage treatment, water treatment, petroleum,

Powder chemical, power electronics, metallurgy, electroplating, paper, food and beverage, pharmaceutical, central air conditioning, construction and other fields, and transmission fluid.

Note 1. When used for transporting explosive media, should meet the requirements of fire and explosion.

Note 2. The design should consider the impact of temperature change on the transmission medium with the pipe, the pipe should be considered low-temperature brittleness and high temperature creep recommended temperature range

-5 °C ~ 45 °C.

Note 3. When used to transport drinking water, food and beverage, pharmaceutical, and its health performance should be consistent with the relevant provisions.

2 Normative references

The following documents contain provisions which, through reference to GB/T 4219 to the present, constitute provisions of this section. For dated reference documents

Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section

Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 1033-1986 plastic density and relative density test method (eqv ISO /DIS1183. 1984)

GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample

Programme (ISO 2859-1.1999, IDT)

GB/T 2918-1998 standard plastic sample conditioning and environmental tests (idt ISO 291.1997)

GB/T 6111-2003 Test method for conveying fluid pressure within the thermoplastic pipe (ISO 1167.1996, IDT)

GB/T 6671-2001 Determination of thermoplastic plastic pipe longitudinal reversion (eqv ISO 2505.1994)

GB/T 8802-2001 Thermoplastics pipes, fittings Vicat softening temperature measured (eqv ISO 2507.1995)

GB/T 8806 plastic pipe size measurement method (GB/T 8806-1988, eqv ISO 3126. 1974)

GB/T 13526 hard polyvinyl chloride (PVC-U) pipes methylene chloride immersion test method (GB/T 13526-2007)

GB/T 14152-2001 thermoplastic pipe resistance to external impact performance test clock method (GB/T 14152-2001, eqv ISO 3127.1994)

GB/T 18252 Plastics piping systems extrapolation determination of thermoplastic pipe long-term hydrostatic strength (GB/T 18252-2000, neq ISO /DIS9080.1997)

GB/T 19278-2003 Thermoplastics pipes, fittings and valves General terms and their definitions

QB/T 2568-2002 rigid polyvinyl chloride (PVC-U) Plastics piping systems with solvent-based adhesives

ISO 4433-1.1997 Thermoplastics pipes for the chemical fluid resistance classification - Part 1. Test methods for dipping

ISO /T R10358.1993 Plastics pipes and fittings comprehensive chemical resistance classification table

3 Terms and definitions, symbols

GB/T 19278-2003, and given the following terms and definitions, symbols applicable to GB/T 4219 of this section.