HG/T 4373-2012Plastic-lined composite pipes and fittings for chemical industry (English PDF)
化工用塑料衬里复合管和管件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4373-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 7, 2012
Implementation date
March 1, 2013
Scope
HG/T 4373-2012 is the English-translated version of 化工用塑料衬里复合管和管件.
Plastic-lined composite pipes and fittings for the chemical industry are the subject of HG/T 4373-2012, a recommended standard in which a glass fiber reinforced polyester body carries an inner plastic liner.
The standard gives the requirements for the products, the rules for installing them, the test methods, the inspection rules, and the provisions for marking, packaging, transport and storage.
It applies to pipes and fittings lined with thermoplastic or thermosetting materials. Among the documents it cites are GB/T 1447, GB/T 1449, GB/T 2576, GB/T 2577, GB/T 5351, GB/T 8237, GB/T 18369, GB/T 18370, QB/T 3801, ASTM C1147, DIN 8078, DIN 8080 and DIN 53769-1. Issued on 7 November 2012, it has applied since 1 March 2013.
Found what you need?
Document preview — HG/T 4373-2012
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4373-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2012 and has been in force since 1 March 2013.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
Plastic-lined composite pipes and fittings for the chemical industry are the subject of HG/T 4373-2012, a recommended standard in which a glass fiber reinforced polyester body carries an inner plastic liner. The standard gives the requirements for the products, the rules for installing them, the test methods, the inspection rules, and the provisions for marking, packaging, transport and storage. It applies to pipes and fittings lined with thermoplastic or thermosetting materials. Among the documents it cites are GB/T 1447, GB/T 1449, GB/T 2576, GB/T 2577, GB/T 5351, GB/T 8237, GB/T 18369, GB/T 18370, QB/T 3801, ASTM C1147, DIN 8078, DIN 8080 and DIN 53769-1.
HG/T 4373-2012 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1447
GB/T 1449
GB/T 1451
GB/T 1463
GB/T 1804
GB/T 2576
GB/T 2577
GB/T 4219.1
GB/T 5351
GB/T 6006
GB/T 8237
GB/T 18369
GB/T 18370
GB/T 18998.2
QB/T 3801
DIN 8078
DIN 8080
DIN 53769-1
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment
GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 4371-2012 — PVC composite-lined towers for chemical industry
HG/T 4370-2012 — Composite gas absorption towers for chemical industry
HG/T 4369-2012 — Chemical ceramic support media with annular holes
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1447Fiber-reinforced plastics composites -- Determination of tensile properties
- GB/T 1449Fibre-reinforced plastic composites -- Determination of flexural properties
- GB/T 1451Fiber-reinforced plastics composites---Determination of Charpy impact properties
- GB/T 1463Test methods for the density and relative density of fibre reinforced plastics
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2576Test method for insoluble matter content of resin used in fiber reinforced plastics
QB/T 3801 · DIN 8078 · DIN 8080 · DIN 53769-1
Similar standards
How to Download HG/T 4373-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1447-1983 — Test method for tensile properties of glass fiber-reinforced plastics
GB/T 1447-2005 — Fiber-reinforced plastics composites -- Determination of tensile properties
GB/T 1449-1983 — Test method for flexural properties of glass fiber-reinforced plastics
HG/T 4373-2012
$255.00