Valid

HG/T 3731-2023Non-metallic chemical equipment - Glass fiber reinforced polyvinyl chloride composite pipes and fittings (English PDF)

非金属化工设备 玻璃纤 维增强聚氯乙烯复合管 和管件

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3731-2023 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 28, 2023

Implementation date

February 1, 2024

Scope

HG/T 3731-2023 is the English-translated version of 非金属化工设备 玻璃纤 维增强聚氯乙烯复合管 和管件.

Glass fibre reinforced polyvinyl chloride composite pipes and fittings for non-metallic chemical equipment are covered by HG/T 3731-2023, a recommended chemical industry standard.

It deals with the raw materials, the design, the manufacture, the requirements, the test methods, the inspection rules, and marking, packaging, transport, storage and accompanying documents.

It applies to pipes and fittings with a rigid polyvinyl chloride or chlorinated polyvinyl chloride thermoplastic lining, an unsaturated polyester or epoxy vinyl ester resin matrix and glass fibre yarn or fabric as reinforcement, in nominal diameters from 20 mm to 1200 mm and at design pressures up to 1.6 MPa.

The working temperature runs from -5 °C to 70 °C with a PVC-U lining and from -5 °C to 95 °C with a PVC-C lining. It supersedes HG/T 3731-2004 and took effect on 1 February 2024.

Found what you need?

Document preview — HG/T 3731-2023

National Standard of the People's Republic of China

Replacing
HG/T 3731-2004

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 3731-2023 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 July 2023 and has been in force since 1 February 2024.

It replaces the earlier edition HG/T 3731-2004.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 3731-2023 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,854 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 25 pages

4 Related standards

Other editions:

HG/T 3731-2004 (earlier edition)

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 3105-2009 — Vitreous and porcelain enamels for sheet steel. Production of specimens for testing

HG/T 3187-2026 — Impermeable graphite heat exchanger with rectangular-block holes

HG/T 2059-2026 — Technical specification for imperious graphite tube

HG/T 2056-2026 — Laminated glass-lined steel condenser

5 Classification and status

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Similar standards

Editions of HG/T 3731

EditionTitleRevisionStatus
HG/T 3731-2023Non-metallic chemical equipment - Glass fiber reinforced polyvinyl chloride composite pipes and fittingscurrent editionCurrent
HG/T 3731-2004Non-metallic chemical equipment - Glass fiber reinforced polyvinyl chloride composite pipes and fittingsprevious editionSuperseded

This page sells the current edition, HG/T 3731-2023. Earlier editions are listed for reference only.

How to Download HG/T 3731-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
25 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3731-2023

$435.00