Valid

GB/T 43298-2023General specification for vacuum drainage integrated equipment (English PDF)

真空排水集成设备通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 43298-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 27, 2023

Implementation date

June 1, 2024

Scope

GB/T 43298-2023 is the English-translated version of 真空排水集成设备通用技术条件.

GB/T 43298-2023 is the Chinese standard "General specification for vacuum drainage integrated equipment".

Its scope clause reads: This document stipulates the classification, codes and markings, general requirements, technical requirements, test methods, inspection rules, and standards for vacuum drainage integrated equipment: Logging, packaging, transportation and storage: This document is applicable to integrated equipment of domestic sewage and wastewater vacuum drainage systems in civil buildings, industrial buildings and residential areas:. Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 43298-2023

National Standard of the People's Republic of China

ICS: 91.140.80
Classification: P 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Classification, code and marking
5 General requirements
6 Technical requirements
7 Test methods
8 Inspection Rules
9 Marking, packaging, transportation and storage
Appendix A (informative) Schematic diagram of vacuum drainage integrated equipment

1 Scope

This document stipulates the classification, codes and markings, general requirements, technical requirements, test methods, inspection rules, and standards for vacuum drainage integrated equipment:

Logging, packaging, transportation and storage:

This document is applicable to integrated equipment of domestic sewage and wastewater vacuum drainage systems in civil buildings, industrial buildings and residential areas:

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations

For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document:

GB/T 150:1 Pressure vessels Part 1: General requirements

GB/T 150:4 Pressure vessels Part 4: Manufacturing, inspection and acceptance

GB/T 700 carbon structural steel

GB/T 1226 General pressure gauge

GB/T 3163 Vacuum technical terms

GB/T 3216 Hydraulic performance acceptance test for rotary power pumps Level 1, Level 2 and Level 3

GB/T 3280 Stainless steel cold-rolled steel plates and strips

GB/T 3797 Electrical control equipment

GB/T 4208 Shell protection level (IP code)

GB/T 4219:1 Rigid polyvinyl chloride (PVC-U) piping systems for industrial use Part 1: Pipes

GB/T 4219:2 Rigid polyvinyl chloride (PVC-U) piping systems for industrial use Part 2: Pipe fittings

GB/T 5226:1 Mechanical and electrical safety mechanical and electrical equipment Part 1: General technical conditions

GB/T 8923:1 Visual assessment of surface cleanliness of steel surface preparation before application of coatings Part 1: Uncoated steel

Rust grade and treatment grade of steel surface after surface and complete removal of original coating

GB/T 12224 General requirements for steel valves

GB/T 13306 Signage

GB/T 14253 General technical conditions for light industrial machinery

GB 14554 Emission standards for odor pollutants

GB/T 16666 Energy saving monitoring of pump liquid delivery systems

GB/T 18742:2 Polypropylene piping systems for hot and cold water Part 2: Pipes

GB/T 18742:3 Polypropylene piping systems for hot and cold water Part 3: Pipe fittings

GB/T 18993:2 Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water - Part 2: Pipes

GB/T 18993:3 Chlorinated polyvinyl chloride (PVC-C) piping systems for hot and cold water Part 3: Pipe fittings

GB/T 20801:5 Pressure piping specification for industrial piping Part 5: Inspection and testing

GB/T 29529-2013 Pump noise measurement and evaluation methods

GB/T 34068 Internet of Things Overall Technology Intelligent Sensor Interface Specification […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB/T 47884-2026|GB/T 46265-2025|GB/T 14294-2026|GB/T 22755-2026|GB/T 24480-2026|GB/T 33833-2026

How to Download GB/T 43298-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.