GB/T 36557-2018General technical requirements of image element scanning instant machine-readable device (English PDF)
扫描图像元快速机读鉴别仪通用技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36557-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 13, 2018
Implementation date
February 1, 2019
Scope
GB/T 36557-2018 is the English-translated version of 扫描图像元快速机读鉴别仪通用技术条件.
GB/T 36557-2018 sets the general technical requirements for scanning image element fast machine-readable discriminators, the readers that capture an image element identifier to retrieve anti-counterfeiting information.
It explains the working principle, in which the reader lens and light source emit light of a specific wavelength, and covers the classification of the devices, their requirements, test methods and inspection rules, together with marking, packaging, transport and storage.
It defines response time and human-computer interaction signal and signal control, and a normative annex grades the performance of the image element decryption software and of the interaction signal control software.
It applies to the manufacture and use of scanning image element identification systems. It was issued on 13 July 2018 and has applied since 1 February 2019.
Found what you need?
Document preview — GB/T 36557-2018
National Standard of the People's Republic of China
- ICS
- 13.310
- Classification
- A 90
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principle
- 5 Category
- 6 Requirements
- 7 Test method
- 8 Inspection rules
- 9 Marking, packaging, transportation and storage
- Appendix A (Normative Appendix) Image Meta-Decryption Decision Software and Human-Computer Interaction Signal Control Software Performance Level
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the principle, classification, requirements, test methods and inspection rules of the scanning image element fast machine-readable discriminator (hereinafter referred to as the discriminator). Then, sign, packaging, transportation and storage.
This standard applies to the product creation and application of the scanning image element fast machine-readable identification system.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 packaging storage and transportation icon
GB/T 4798.2 Environmental conditions for the application of electric and electronic products - Part 2. Transport
GB/T 4857.5 packaging and transportation package drop test method
GB/T 4857.20 Packaging transport package crash test method
General technical conditions for GB/T 13384 mechanical and electrical product packaging
GB/T 17004-1997 anti-counterfeiting technical terminology
GB/T 17618 Information technology equipment immunity limits and methods of measurement
GB/T 36556 scanning image element cascade anti-counterfeiting technical conditions
3 Terms and definitions
The following terms and definitions as defined in GB/T 17004-1997 apply to this document.
3.1 Response time
The response time of the sensor from no load to a change in the step of the load.
3.2 Human-computer interaction signal
The use of a certain dialogue language between a person and a computer to complete the process of information exchange between a person and a computer in a specific interactive manner Electromagnetic coding or electronic coding.
3.3 Human-computer interaction signal control
Electromagnetic coding or electronic coding between a person and a computer to complete an information exchange process between a person and a computer that determines a task Controllable management. […]
4 Principle
The discriminator obtains anti-counterfeiting information by grabbing the image element identifier. The basic principle is that the discriminator lens light source emits light of a specific wavelength.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 4798.2Classification of environmental conditions - Classification of groups of environmental parameters and their severities - Part 2: Transportation and handling
- GB/T 4857.5Packaging-Transport packages-Vertical impact test method by dropping
- GB/T 4857.20Packaging--Transport packages--Bump test method
- GB/T 13384General specifications for packing of mechanical and electrical product
- GB/T 17004-1997Anti-counterfeiting technological terminology
GB/T 17618
Similar standards
How to Download GB/T 36557-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 17004-1997 — Anti-counterfeiting technological terminology
GB/T 191-2025 — Graphical symbols marking for handling and storage of packages
Secure payment via Stripe
Payments accepted
GB/T 36557-2018
$205.00