Valid

GB 46036-2025Security protection - Transparent protection materials (English PDF)

安全防范透明防护材料

Preview PDF

This is a limited preview

Buy now to download the full PDF (25 pages)

Need quotation for your management?

Get a formal quotation for GB 46036-2025 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Mandatory

Issue date

August 1, 2025

Implementation date

February 1, 2026

Scope

GB 46036-2025 is the English-translated version of 安全防范透明防护材料.

GB 46036-2025 is the Chinese standard "Security protection - Transparent protection materials".

Its scope clause reads: This document specifies the classification, grading and code, technical requirements, labeling, packaging, transportation and storage of transparent protective materials, and establishes the The inspection rules for protective materials are described and the corresponding test methods are described.

This document applies to the research, development, manufacturing and inspection of transparent protective materials used in the security field. Its clauses include terms and definitions.

Found what you need?

Document preview — GB 46036-2025

National Standard of the People's Republic of China

ICS: 13.310
Classification: A91

Issued by: State Administration for Market Regulation; Standardization Administration of China

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Classification, Grading and Code
4.1 Classification
4.2 Classification
4.3 Code
5 Technical Requirements
5.1 Appearance, structure and logo
5.2 Dimensions and deviations
5.3 Visible light transmittance
5.4 Protection performance
5.5 Ambient temperature adaptability
6 Test methods
6.1 Appearance, structure and marking inspection
6.2 Dimension and deviation inspection
6.3 Visible light transmittance test
6.4 Protection performance test
6.5 Environmental temperature adaptability test
7 Inspection Rules
7.1 Inspection categories
7.2 Inspection Item
7.3 Decision Rules
7.4 Batch Rules
7.5 Sampling Rules
8 Labeling, packaging, transportation and storage
8.1 Identification
8.2 Packaging
8.3 Transportation
8.4 Storage
Appendix A (Informative) Other types of ammunition requiring special attention
Appendix B (Normative) Ballistic Performance Test Method
Appendix C (Normative) Anti-smashing performance test method
Appendix D (Informative) Common Explosives and Their Equivalent Conversions
Appendix E (Normative) Test method for non-contact explosion shock wave overpressure test

1 Scope

This document specifies the classification, grading and code, technical requirements, labeling, packaging, transportation and storage of transparent protective materials, and establishes the

The inspection rules for protective materials are described and the corresponding test methods are described.

This document applies to the research, development, manufacturing and inspection of transparent protective materials used in the security field.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to

This document.

GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on acceptance quality limit (AQL)

GB/T 5137.2 Test methods for automotive safety glass - Part 2.Optical performance test

GB/T 6544 Corrugated cardboard

GA/T 1727 Calibration specification for light curtain target velocimeters

WJ/T 9029-2004 Industrial TNT

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1

Used in the field of security and prevention, it has one or more properties such as bulletproof, anti-smash, and explosion-proof, and its visible light transmittance meets certain requirements.

Required plate.

3.2 strikeface

The surface of the transparent protective material that is first impacted.

3.3 testing card

Single corrugated cardboard used to monitor the state of splashes on the back side of the impact surface of the test piece and its destructive power.

3.4 spatteredfragment

After the impact, the specimen is generated and the fragments fly away from the specimen.

3.5 penetration

The permeability perforation phenomenon formed after the specimen is impacted.

3.6

Nominal value of the total thickness of the transparent protective material structure.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 25 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

GB 12662-2008|GB 12664-2024|GB 17565-2022|GB 20815-2006|GB 21556.2-2025

Editions of GB 46036

Edition	Title	Revision	Status
GB 46036-2025	Security protection - Transparent protection materials	current edition	Current

This page sells the current edition, GB 46036-2025. Earlier editions are listed for reference only.

How to Download GB 46036-2025

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.